Bosch GWS GWS 24 230 LVI - Инструкция по эксплуатации - Страница 21

22

 | English 

1 609 929 L56 | (4.6.08)

Bosch Power Tools

g) If devices are provided for the connec-

tion of dust extraction and collection fa-

cilities, ensure these are connected and 

properly used. 

Use of dust collection can 

reduce dust-related hazards.

4) Power tool use and care

a) Do not force the power tool. Use the cor-

rect power tool for your application. 

The 

correct power tool will do the job better 

and safer at the rate for which it was de-

signed.

b) Do not use the power tool if the switch 

does not turn it on and off. 

Any power 

tool that cannot be controlled with the 

switch is dangerous and must be re-

paired.

c) Disconnect the plug from the power 

source and/or the battery pack from the 

power tool before making any adjust-

ments, changing accessories, or storing 

power tools. 

Such preventive safety 

measures reduce the risk of starting the 

power tool accidentally.

d) Store idle power tools out of the reach of 

children and do not allow persons unfa-

miliar with the power tool or these in-

structions to operate the power tool. 

Power tools are dangerous in the hands of 

untrained users.

e) Maintain power tools. Check for mis-

alignment or binding of moving parts, 

breakage of parts and any other condi-

tion that may affect the power tool’s op-

eration. If damaged, have the power tool 

repaired before use. 

Many accidents are 

caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean. 

Prop-

erly maintained cutting tools with sharp 

cutting edges are less likely to bind and 

are easier to control.

g) Use the power tool, accessories and tool 

bits etc. in accordance with these in-

structions, taking into account the work-

ing conditions and the work to be per-

formed. 

Use of the power tool for 

operations different from those intended 

could result in a hazardous situation.

5) Service

a) Have your power tool serviced by a qual-

ified repair person using only identical 

replacement parts. 

This will ensure that 

the safety of the power tool is maintained.

Machine-specific 

Safety Warnings

Safety Warnings common for Grinding, 

Sanding, Wire Brushing or Abrasive Cut-

ting Off Operations

f

This power tool is intended to function as a 

grinder, sander, wire brush or cut-off tool. 

Read all safety warnings, instructions, illus-

trations and specifications provided with 

this power tool. 

Failure to follow all instruc-

tions listed below may result in electric 

shock, fire and/or serious injury.

f

This power tool is not recommended for 

polishing. 

Operations for which the power 

tool was not designed may create a hazard 

and cause personal injury.

f

Do not use accessories which are not spe-

cifically designed and recommended by the 

tool manufacturer. 

Just because the acces-

sory can be attached to your power tool, it 

does not assure safe operation.

f

The rated speed of the accessory must be at 

least equal to the maximum speed marked 

on the power tool. 

Accessories running fast-

er than their rated speed can break and fly 

apart.

f

The outside diameter and the thickness of 

your accessory must be within the capacity 

rating of your power tool. 

Incorrectly sized 

accessories cannot be adequately guarded 

or controlled.

f

The arbor size of wheels, flanges, backing 

pads or any other accessory must properly 

fit the spindle of the power tool. 

Accesso-

ries with arbor holes that do not match the 

mounting hardware of the power tool will run 

out of balance, vibrate excessively and may 

cause loss of control.

OBJ_BUCH-429-005.book  Page 22  Wednesday, June 4, 2008  11:55 AM