DeLonghi EN560.S - Инструкция по эксплуатации - Страница 114

ES

PT

Nenhum indicador luminoso. 

➔

  Verifique a alimentação elétrica, a ficha, a tensão e o fusível. Em caso de problemas, ligue para o Clube 

Nespresso

.

Não sai café, não sai água.

➔

  O depósito de água está vazio. Encha o depósito de água.

➔

  Caso seja necessário, descalcifique a máquina; consulte a secção relativa à descalcificação.

O café sai muito devagar.

➔

  A velocidade do fluxo depende da variedade de café.

➔

  Caso seja necessário, descalcifique a máquina; consulte a secção relativa à descalcificação.

Não sai café, sai apenas água (apesar da cápsula estar colocada).

➔

  Em caso de problemas, envie o aparelho para reparação ou contacte o Club 

Nespresso

.

O café não fica quente o suficiente.

➔

  Pré-aqueça a chávena.

➔

  Caso seja necessário, descalcifique a máquina; consulte a secção relativa à descalcificação.

A zona da cápsula está a verter (existe água no recipiente das cápsulas). 

➔

  Posicione corretamente a cápsula. Se ocorrerem fugas, ligue para o Club 

Nespresso

.

Luz irregular.

➔

  Envie o aparelho para reparação ou contacte o Club 

Nespresso

.

Todos os botões piscam simultaneamente durante 10 segundos e, em 
seguida, a máquina desliga-se automaticamente.

➔

  Aviso de erro, a máquina precisa de reparação. Envie o aparelho para reparação ou contacte o Club 

Nespresso

.

Os 6 botões piscam rapidamente 3 vezes e depois a máquina regressa ao 
modo pronto para utilização.

➔

  O depósito de água está vazio.

Os avisos de descalcificação e limpeza piscam.

➔

  A máquina está no modo Menu, pressione o botão Lungo e espuma de leite durante 3 segundos para sair do 

modo Menu ou aguarde 30 segundos para sair automaticamente.

O aviso de descalcificação pisca a laranja e os botões de bebidas ficam 
disponíveis (aviso de descalcificação nível 1).

➔

  A máquina ativa o aviso de descalcificação de acordo com o histórico de consumo de bebidas. Proceda à 

descalcificação da máquina.

O aviso de descalcificação pisca a laranja e os botões de bebidas ficam 
disponíveis (aviso de descalcificação nível 2).

➔

  O processo de descalcificação não foi realizado corretamente. Proceda à descalcificação da máquina.

O aviso de descalcificação pisca a laranja e a luz da espuma de leite 
quente fica acesa de forma permanente.

➔

  A máquina está no modo de Descalcificação. Pressione o botão de leite quente para iniciar o processo de 

descalcificação.

O aviso de descalcificação pisca a laranja e os botões de bebidas estão 
indisponíveis (aviso de descalcificação nível 3).

➔

  Máquina bloqueada devido ao nível de calcário demasiado elevado. Proceda à descalcificação da máquina.

Aviso de limpeza cor de laranja.

➔

  Enxague o sistema de leite.

Todos os botões de café e todos os botões de receitas de leite piscam 
alternadamente.

➔

  Máquina em sobreaquecimento, aguarde até a máquina arrefecer.

➔

  O aparelho ficará bloqueado durante aproximadamente 10 minutos após o esvaziamento.

Não é possível baixar totalmente a alavanca.

➔

  Esvazie o recipiente das cápsulas. Certifique-se de que não há nenhuma cápsula presa dentro do recipiente 

das cápsulas.

A qualidade da espuma de leite não está ao nível habitual.

➔

  Utilize leite magro ou meio gordo à temperatura do frigorífico (cerca de 4° C).

➔

  Enxague após cada preparação à base de leite (consulte a secção «Lavagem à Mão da Preparação de 

Cappuccino Automática (P.C.A.)».

➔

  Proceda à descalcificação da máquina (consulte a p. 108).

➔

  Não utilize leite congelado.

Não consigo entrar no modo Menu.

➔

  Certifique-se de que removeu o depósito de leite.

➔

  Certifique-se de que pressiona o botão Lungo e espuma de leite durante 3 segundos.

➔

  Retire o tubo de descalcificação.

R E S O LU Ç ÃO   D E   P R O B L E M A S

ESPECIFICACIONES/

ESPECIFICAÇÕES

LATTISSIMA TOUCH

EUR,AUS,NZ: 220240 V, 50/60 Hz, 1300 W
US/CA:

120 V, 60 Hz, 1200 W

19 bar

6.5 kg

1,38 litre

500 ml

13-16 capsules

l=19,4 cm  .  L=33,2 cm  .  h=27,4 cm

Troubleshooting

Contact the Nespressso Club

For any additional information, in case of problems 

or simply to seek advise, call the Nespresso Club. 

Contact details of the Nespresso Club can be found 

in the 'Welcome to Nespresso' folder in your 

machine box or at nespresso.com

No light on display

Check the mains, plug, voltage, and fuse. In case of problems, call the Nespresso Club.

Coffee comes out very slowly.

Flow speed depends on the coffee variety.

Perform a self check of the machine. Enter the menu list and select Maintenance. Follow instruction

Coffee is not hot enough.

Preheat cup.

Perform a self check of the machine. Enter the menu list and select Maintenance. Follow instruction

Capsule area is leaking (water in capsule container). 

Position capsule correctly. If leakages occur, call the Nespresso Club.

Irregular blinking.

Send appliance to repair or call the Nespresso Club.

No coffee, just water runs out (despite inserted capsule).

In case of problems, call the Nespresso Club.

Lever cannot be closed completely

Empty capsule container. Make sure that no capsule is blocked inside the capsule container.

Quality of milk froth is not up to standard

1) For a perfect milk froth, use skimmed or semi-skimmed milk at refrigerator temperature (about 4° C)

2) Rinse after each milk based preparation. Place a recipient under milk outlet, rotate the milk 

regulator knob until “CLEAN” position.

3) Every two days, disassemble the R. C. S. and clean all components in the upper level of a 

dishwasher

Warranty

Delonghi warrants this product against defects in materials and workmanship for a period of two years from the date of purchase. During this period, Delonghi will either repair or 

replace, at its discretion, any defective product at no charge to the owner. Replacement products or repaired parts will be guaranteed for only the unexpired portion of the original 

warranty or six months, whichever is greater. This limited warranty does not apply to any defect resulting from accident, misuse, improper maintenance, or normal wear and tear. Any 

defect resulting from the usage of non genuine Nespresso capsules will not be covered by this warranty. Except to the extent allowed by applicable law, the terms of this limited warranty 

do not exclude, restrict

or modify, and are in addition to, the mandatory statutory rights applicable to the sale of the product to you. If you believe your product is defective, contact Nespresso for instructions on 

where to send or bring it for repair. Please visit our website at nespresso.com to discover more about Nespresso

Specifications

P

max

Once the rinsing process is finished, the 

machine switches off. Clean the machine 

using a damp cloth. You have now finished 

descaling the machine.

9

10

11

12

Rinsing process 

Rinse and fill water with 

fresh potable water up to MAX level.

Rinsing process 

Place one container of 

minimum 1 litre under both the coffee 

outlet and the hot water spout.

PRESS      to confirm.

The rinsing cycle continues trough the coffee 

outlet, hot water spout and drip tray until the 

water tank is empty.

Water hardness setting

1

programmed buttons blinks 3 times: water hardness is set

i

1”

2

3

4

1
2
3
4
5

Place the water hardness sticker under 

water for 1 second.

The number of red squares indicates 

the water harness level.

Set the value accordingly

Enter the menu, browse the options and select 

WATER HARDNESS.

You will be guided to set the value.

Follow machine display instructions.

max

max

Kg

11

12

EUR, AUS, NZ: 220-240 V,  

50-60 Hz, 1400 W

EUR,AUS,NZ: 220240 V, 50/60 Hz, 1300 W
US/CA:

120 V, 60 Hz, 1200 W

19 bar

6.5 kg

1,38 litre

500 ml

13-16 capsules

l=19,4 cm  .  L=33,2 cm  .  h=27,4 cm

Troubleshooting

Contact the Nespressso Club

For any additional information, in case of problems 

or simply to seek advise, call the Nespresso Club. 

Contact details of the Nespresso Club can be found 

in the 'Welcome to Nespresso' folder in your 

machine box or at nespresso.com

No light on display

Check the mains, plug, voltage, and fuse. In case of problems, call the Nespresso Club.

Coffee comes out very slowly.

Flow speed depends on the coffee variety.

Perform a self check of the machine. Enter the menu list and select Maintenance. Follow instruction

Coffee is not hot enough.

Preheat cup.

Perform a self check of the machine. Enter the menu list and select Maintenance. Follow instruction

Capsule area is leaking (water in capsule container). 

Position capsule correctly. If leakages occur, call the Nespresso Club.

Irregular blinking.

Send appliance to repair or call the Nespresso Club.

No coffee, just water runs out (despite inserted capsule).

In case of problems, call the Nespresso Club.

Lever cannot be closed completely

Empty capsule container. Make sure that no capsule is blocked inside the capsule container.

Quality of milk froth is not up to standard

1) For a perfect milk froth, use skimmed or semi-skimmed milk at refrigerator temperature (about 4° C)

2) Rinse after each milk based preparation. Place a recipient under milk outlet, rotate the milk 

regulator knob until “CLEAN” position.

3) Every two days, disassemble the R. C. S. and clean all components in the upper level of a 

dishwasher

Warranty

Delonghi warrants this product against defects in materials and workmanship for a period of two years from the date of purchase. During this period, Delonghi will either repair or 

replace, at its discretion, any defective product at no charge to the owner. Replacement products or repaired parts will be guaranteed for only the unexpired portion of the original 

warranty or six months, whichever is greater. This limited warranty does not apply to any defect resulting from accident, misuse, improper maintenance, or normal wear and tear. Any 

defect resulting from the usage of non genuine Nespresso capsules will not be covered by this warranty. Except to the extent allowed by applicable law, the terms of this limited warranty 

do not exclude, restrict

or modify, and are in addition to, the mandatory statutory rights applicable to the sale of the product to you. If you believe your product is defective, contact Nespresso for instructions on 

where to send or bring it for repair. Please visit our website at nespresso.com to discover more about Nespresso

Specifications

P

max

Once the rinsing process is finished, the 

machine switches off. Clean the machine 

using a damp cloth. You have now finished 

descaling the machine.

9

10

11

12

Rinsing process 

Rinse and fill water with 

fresh potable water up to MAX level.

Rinsing process 

Place one container of 

minimum 1 litre under both the coffee 

outlet and the hot water spout.

PRESS      to confirm.

The rinsing cycle continues trough the coffee 

outlet, hot water spout and drip tray until the 

water tank is empty.

Water hardness setting

1

programmed buttons blinks 3 times: water hardness is set

i

1”

2

3

4

1
2
3
4
5

Place the water hardness sticker under 

water for 1 second.

The number of red squares indicates 

the water harness level.

Set the value accordingly

Enter the menu, browse the options and select 

WATER HARDNESS.

You will be guided to set the value.

Follow machine display instructions.

max

max

Kg

11

12

Max. 19 bares/

Máx. 19 bar

EUR,AUS,NZ: 220240 V, 50/60 Hz, 1300 W
US/CA:

120 V, 60 Hz, 1200 W

19 bar

6.5 kg

1,38 litre

500 ml

13-16 capsules

l=19,4 cm  .  L=33,2 cm  .  h=27,4 cm

Troubleshooting

Contact the Nespressso Club

For any additional information, in case of problems 

or simply to seek advise, call the Nespresso Club. 

Contact details of the Nespresso Club can be found 

in the 'Welcome to Nespresso' folder in your 

machine box or at nespresso.com

No light on display

Check the mains, plug, voltage, and fuse. In case of problems, call the Nespresso Club.

Coffee comes out very slowly.

Flow speed depends on the coffee variety.

Perform a self check of the machine. Enter the menu list and select Maintenance. Follow instruction

Coffee is not hot enough.

Preheat cup.

Perform a self check of the machine. Enter the menu list and select Maintenance. Follow instruction

Capsule area is leaking (water in capsule container). 

Position capsule correctly. If leakages occur, call the Nespresso Club.

Irregular blinking.

Send appliance to repair or call the Nespresso Club.

No coffee, just water runs out (despite inserted capsule).

In case of problems, call the Nespresso Club.

Lever cannot be closed completely

Empty capsule container. Make sure that no capsule is blocked inside the capsule container.

Quality of milk froth is not up to standard

1) For a perfect milk froth, use skimmed or semi-skimmed milk at refrigerator temperature (about 4° C)

2) Rinse after each milk based preparation. Place a recipient under milk outlet, rotate the milk 

regulator knob until “CLEAN” position.

3) Every two days, disassemble the R. C. S. and clean all components in the upper level of a 

dishwasher

Warranty

Delonghi warrants this product against defects in materials and workmanship for a period of two years from the date of purchase. During this period, Delonghi will either repair or 

replace, at its discretion, any defective product at no charge to the owner. Replacement products or repaired parts will be guaranteed for only the unexpired portion of the original 

warranty or six months, whichever is greater. This limited warranty does not apply to any defect resulting from accident, misuse, improper maintenance, or normal wear and tear. Any 

defect resulting from the usage of non genuine Nespresso capsules will not be covered by this warranty. Except to the extent allowed by applicable law, the terms of this limited warranty 

do not exclude, restrict

or modify, and are in addition to, the mandatory statutory rights applicable to the sale of the product to you. If you believe your product is defective, contact Nespresso for instructions on 

where to send or bring it for repair. Please visit our website at nespresso.com to discover more about Nespresso

Specifications

P

max

Once the rinsing process is finished, the 

machine switches off. Clean the machine 

using a damp cloth. You have now finished 

descaling the machine.

9

10

11

12

Rinsing process 

Rinse and fill water with 

fresh potable water up to MAX level.

Rinsing process 

Place one container of 

minimum 1 litre under both the coffee 

outlet and the hot water spout.

PRESS      to confirm.

The rinsing cycle continues trough the coffee 

outlet, hot water spout and drip tray until the 

water tank is empty.

Water hardness setting

1

programmed buttons blinks 3 times: water hardness is set

i

1”

2

3

4

1
2
3
4
5

Place the water hardness sticker under 

water for 1 second.

The number of red squares indicates 

the water harness level.

Set the value accordingly

Enter the menu, browse the options and select 

WATER HARDNESS.

You will be guided to set the value.

Follow machine display instructions.

max

max

Kg

11

12

 ~ 4.5 kg

0.9 Litros/

Litros 

0.35 Litros/

Litros

17.3 cm         25.8 cm

 32 cm

114

UM_LATTISSIMA_TOUCH_FACELIFT_Z2A.indb   114

19.10.17   10:01