Philips GC4720 - Инструкция по эксплуатации - Страница 12

Problem

Possible cause

Solution

You have put an additive in 

the water tank.

Rinse the water tank and do not put any 

additive in the water tank.

You have used the steam 

boost function at a 

temperature setting below 

3

.

Set  the temperature dial to a setting between 

and 

3

 and MAX.

Water drips from 

the soleplate after 

the iron has 

cooled down or 

has been stored.

The iron has been put in 

horizontal position with 

water still left in the water 

tank.

Empty the water tank before you store the 

iron. Store the iron on its heel.

Flakes and 

impurities come 

out of the 

soleplate during 

ironing.

Hard water forms flakes 

inside the soleplate.

Use the Calc-Clean function one or more 

times (see chapter ‘Cleaning and maintenance’, 

section ‘Using the Calc-Clean function’).

The red auto-off 

light flashes 

(specific types 

only).

The automatic shut-off 

function has switched off 

the iron (see chapter 

‘Features’).

Move the iron slightly to deactivate the 

automatic shut-off function. The red auto-off 

light stops flashing.

The blue tank 

light flashes 

(specific types 

only).

The automatic shut-off 

function has switched off 

the iron (see chapter 

‘Features’, section 

‘Automatic shut-off 

function’).

Move the iron slightly to deactivate the 

automatic shut-off function. The blue tank light 

stops flashing.

The iron makes a 

humming sound.

The Ionic DeepSteam 

function is on.

If you hear the humming sound when you iron 

without steam, stop pressing the Ionic 

DeepSteam trigger. The Ionic DeepSteam 

function has no effect when you iron without 

steam.

EnGlISh

12