Bertazzoni F457MODVTC - Инструкция по эксплуатации - Страница 47

23

EN

/ Cleaning / Troubleshooting

Before performing any manual cleaning operation, 
wait for all parts to cool down and isolate the oven 
from the electrical supply.
Scrupulous care of your oven will help keep it in 
excellent condition for many years to come.  

Cleaning enamelled or painted parts:

To maintain the characteristics of the enamelled 
components, they should be cleaned frequently 
with soapy water. Never use scouring powders. 
Do not leave acidic or basic substances (vinegar, 
lemon juice, salt, tomato juice etc.) sitting on 
enamelled parts, and do not wash enamelled 
parts when they are still hot.

Cleaning Stainless-Steel Parts: 

Clean the components with soapy water and then 
dry them with a soft cloth, following the direction of 
the brushed 

fi

 nish. The shine can be maintained 

by periodic use of commonly available products. 
Do not use harsh/aggressive detergents such as:
• Limescale 

removers

• Bleach
• Hydrochloric 

acid

• Ammonia
•  Scouring pads or powders
Immediately remove limescale, grease, starch or 
egg-white stains.

Cleaning the Door Glazing:

To degrease, use washing-up liquid and vinegar, 
then rinse; otherwise, clean with washing-up 
liquid, rinse, then pass over with a moist cloth 
before drying.
To remove encrusted food, soak with soapy water 
or washing-up liquid for a few minutes. After a few 
minutes, rinse o

ff

  then dry with a soft cloth.

Avoid anti-limescale, abrasive and multi-purpose 
products, as they will a

ff

 ect the look of the glass 

after a while.

Cleaning the Oven Racks:

Do not wash the racks in the dishwasher.
Immerse them in hot soapy water, then wipe with 
a non-abrasive sponge before rinsing and drying 
with a tea towel.

Cleaning Handles:

Clean the components with soapy water and then 
dry them with a soft cloth, following the direction 
of the brushed 

fi

 nish. Never use scouring powders 

or pads.

Seal:

Wipe with a damp cloth.

Hydroclean 

Twenty-minute low-temperature oven cleaning 
cycle.
1.  Manually remove any pieces of food and 

larger residues with a damp sponge.

2.  Pour 400 ml of water onto the base inside the 

cavity.

3.  Spray a solution of water and washing-up 

liquid (using a spray bottle) onto the side walls.

4.  Activate the function (duration approx. 20min).
5.  Once it has cooled back down, dry with a soft 

cloth.

Descaling

When the steam generator operates, limescale 
will build up in it. Clean the steam circuit in order 
to prevent excessive scale build-up.
Two reminders will be given to perform descaling. 
The 

fi

 rst serves as a reminder, suggesting that the 

user run the descaling function.
The second is mandatory – the cooking function 
in progress will be completed, but following this 
steam functions will be disabled until descaling is 
performed.
It is not possible to disable the descaling reminder.
6.  Select the Descale function from the settings 

menu.

7.  Pour 500ml of descaler solution into the 

reservoir.

8.  Start cleaning (this takes around 30 min.)
9.  Remove the reservoir and empty it when 

instructed to do so.

10. Rinse the reservoir with clean water.
11. Fill the reservoir with 500ml of cold, clean 

water.

12. Start the rinse cycle.   
13. Repeat the cycle from step 4 three times, 

following the instructions on the display.

14. 

After the last rinse, clean the reservoir 
thoroughly with soapy water and dry with a 
soft cloth.

It is essential to follow the rinsing instructions, 
since the descaling solution is harmful.
If the descaling procedure is not completed 
correctly, it will not be possible to start a steam 
function and the reminder will remain active.
Do not use the descaling solution on the control 
panel or on the other surfaces of the appliance. 
This would damage them. In the event of any 
spillages, immediately rinse o

ff

  the descaling 

solution with clean water.

CLEANING THE APPLIANCE