Обогреватели Wing W200 EC 1-4-2801-0057 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
36
EN
WING
W100-200
WING
E100-200
WING
C100-200
9. TECHNICAL INFORMATION TO THE REGULATION (EU) NO
327/2011 IMPLEMENTING DIRECTIVE 2009/125/EC
WING 100
WING 150
WING 200
1. 24.2%
24.0%
24.6%
2. B
3. Total
4. 21
21
21
5. VSD-No
6. 2016
7.
VTS Plant Sp. z o.o., CRN 0000144190, Poland
8. 1-2-2801-0154
1-2-2801-0215
1-2-2801-0216
9.
0.41kW, 2826m³/h, 145Pa
0.48kW, 4239m³/h, 124Pa
0.68kW, 6006m³/h, 128Pa
10. 1376RPM
1370RPM
1372RPM
11. 1.0
12.
'HYLFHGLVDVVHPEO\VKRXOGEHSHUIRUPHGDQGRUVXSHUYLVHGE\SHUSHUO\TXDOLͤHGSHUVRQQHOKDYLQJVXͦFLHQW
NQRZOHGJH&RQWDFWDFHUWLͤHGZDVWHGLVSRVDOFRPSDQ\LQ\RXUUHJLRQ([SODLQZKDWLVWRWDNHSODFHLQWHUPVRIGHYLFH
disassembly and subassembly securing. Disassemble the device using general procedures applied in mechanical
engineering.
WARNING
The fan unit consists of heavy elements. These elements can fall down during disassembly, causing the death, severe
injury of the staff, as well as material damages.
Learn the following safety principles:
1. Disconnect the power, including all related subsystems.
2. Prevent the device from restarting.
3. Make sure the device is disconnected from power supply.
4. Secure or isolate all elements which are powered and situated nearby.
To restore power supply, reverse the procedure.
Components:
In its dominant part, the device consists of of components made of steel, copper, aluminum and plastics, in varying
proportions (the rotor is made of SAN - styrene, acrylonitrile, structural material with the addition of 20% of glass
ͤEHUDQGUXEEHUQHRSUHQHVRFNHWVEHDULQJKXEV7KHFRPSRQHQWVPXVWEHVRUWHGEHIRUHUHF\FOLQJDFFRUGLQJWRWKH
following material categories: iron and steel, aluminum, copper, non-ferrous metals, e.g. winding (winding insulation
will be burnt in the course of copper recycling, insulation materials, electrical wires, electronic waste (condenser,
etc.), plastic elements (fan rotor, winding shields, etc.), rubber elements (neoprene). The same applies to textiles
and cleaning substances used to disassemble the components. Elements should be separated according to local
regulations or by a specialist recycling company.
13.
Long period of defect-free operation depends on maintaining the product / device / fan in the scope of working
SDUDPHWHUVVSHFLͤHGE\WKHVOHFWLRQDQGXVDJHVRIWZDUHDFFRUGLQJWRWKHLQWHQGHGSXUSRVHVVSHFLͤHGLQWKH
operation and maintenance documentation enclosed to the device. To ensure correct operation of the device, always
adhere to the technical documentation, and particularly chapters: assembly, startup, use and maintenance.
14.
)DQKRXVLQJLQWHUQDOSURͤOHV
