Bosch GWS 18-125 V-LI - Инструкция по эксплуатации - Страница 18

 English | 

19

Bosch Power Tools

1 609 92A 0N2 | (5.6.14)

be placed under the workpiece near the line of cut and near 
the edge of the workpiece on both sides of the wheel.



Use extra caution when making a “pocket cut” into ex-
isting walls or other blind areas. 

The protruding wheel 

may cut gas or water pipes, electrical wiring or objects that 
can cause kickback.

Safety warnings specific for sanding operations



Do not use excessively oversized sanding disc paper. 
Follow manufacturers recommendations, when select-
ing sanding paper. 

Larger sanding paper extending be-

yond the sanding pad presents a laceration hazard and 
may cause snagging, tearing of the disc, or kickback.

Safety warnings specific for wire brushing operations



Be aware that wire bristles are thrown by the brush 
even during ordinary operation. Do not overstress the 
wires by applying excessive load to the brush. 

The wire 

bristles can easily penetrate light clothing and/or skin.



If the use of a guard is recommended for wire brushing, 
do not allow any interference of the wire wheel or 
brush with the guard. 

Wire wheel or brush may expand in 

diameter due to work load and centrifugal forces.

Additional safety warnings

Wear safety goggles.



Use appropriate detectors to determine if utility lines 
are hidden in the work area or call the local utility com-
pany for assistance. 

Contact with electric lines can lead 

to fire and electric shock. Damaging a gas line can lead to 
explosion. Penetrating a water line causes property dam-
age.



Do not touch grinding and cutting discs before they 
have cooled down. 

The discs can become very hot while 

working.



Secure the workpiece. 

A workpiece clamped with clamp-

ing devices or in a vice is held more secure than by hand.



Do not open the battery. 

Danger of short-circuiting.

Protect the battery against heat, e. g., against 
continuous intense sunlight, fire, water, and 
moisture. 

Danger of explosion.



In case of damage and improper use of the battery, va-
pours may be emitted. Ventilate the area and seek 
medical help in case of complaints. 

The vapours can irri-

tate the respiratory system.



Use the battery only in conjunction with your Bosch 
product. 

This measure alone protects the battery against 

dangerous overload.



The battery can be damaged by pointed objects such as 
nails or screwdrivers or by force applied externally. 

An 

internal short circuit can occur and the battery can burn, 
smoke, explode or overheat.

Product Description and Specifica-
tions

Read all safety warnings and all instruc-
tions. 

Failure to follow the warnings and in-

structions may result in electric shock, fire 
and/or serious injury.

While reading the operating instructions, unfold the graphics 
page for the machine and leave it open.

Intended Use

The machine is intended for cutting, roughing and brushing of 
metal and stone materials without the use of water.
For cutting with bonded abrasives, a special cutting guard 
(accessory) must be used.
When cutting in stone, provide for sufficient dust extraction.
With approved sanding tools, the machine can be used for 
sanding with sanding discs.

Product Features

The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.

1

Direction-of-rotation arrow on housing

2

Spindle lock button

3

On/Off switch

4

Hex key

5

Battery pack *

6

Battery unlocking button *

7

Auxiliary handle (insulated gripping surface)

8

Grinder spindle

9

Locking screw for protection guard

10

Protection guard for grinding

11

Mounting flange with O-ring

12

Grinding wheel *

13

Clamping nut

14

Quick-clamping nut 

*

15

Carbide grinding head *

16

Protection guard for cutting *

17

Cutting disc *

18

Hand guard *

19

Rubber sanding plate *

20

Sanding sheet *

21

Round nut *

22

Cup brush *

23

Button for charge-control indicator *

24

Battery charge-control indicator *

25

Handle (insulated gripping surface)

26

Cutting guide with dust extraction protection guard *

27

Diamond cutting disc *

* Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories 
can be found in our accessories program.

OBJ_BUCH-1102-006.book  Page 19  Thursday, June 5, 2014  1:02 PM