Роутеры TP-Link TD-W8151N - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note: The manufacturer is not responsible for any radio or tv interference caused by
unauthorized modifications to this equipment. Such modifications could void the user’s authority
to operate the equipment.
СЕРТИФИКАЦИЯ FCC
Данное оборудование прошло соответствующие испытания, которые показали, что оно
соответствует требованиям для цифровых устройств класса «B» в соответствии с частью
15 правил FCC. Данные требования были разработаны, чтобы обеспечить оптимальную
защиту от неблагоприятных явлений интерференции при эксплуатации в домашних
условиях. Оборудование генерирует, использует и излучает радиоволны, которые при
неправильной установке и эксплуатации, могут вызывать неблагоприятные явления
интерференции для беспроводной передачи данных. Однако нет гарантии, что подобные
явления интерференции не возникнут в отдельных случаях установки. В случае, если
оборудование генерирует помехи, препятствующие нормальному приему радио- или
телесигнала (это можно определить, выключив и включив его), рекомендуется
предпринять следующие действия:
•
Изменить положение или передвинуть принимающую антенну.
•
Увеличить расстояние между оборудованием и приемником.
•
Подключить оборудование и приемник к разным розеткам.
•
Обратиться к дилеру или к опытному специалисту по радио- или телевизионному
оборудованию.
Устройство соответствует требованиям части 15 правил FCC. Эксплуатация производится
с учетом следующих двух условий:
3) Устройство не должно вызывать неблагоприятных явлений интерференции.
4) Устройство может работать с любым типом интерференции, включая
интерференцию, которая может вызвать нежелательный режим эксплуатации.
Любые изменения, не одобренные явным образом стороной, отвечающей за соответствие,
могут повлечь за собой отмену права пользователя на эксплуатацию оборудования.
Примечание: Производитель не несет ответственности за интерференцию радио- или
телевизионного сигнала, вызванного несанкционированными изменениями, внесенными в
оборудование. Такие изменения могут повлечь за собой отмену права пользователя на
эксплуатацию оборудования.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This device and its antenna must not be co-located or operating in conjunction with
any other antenna or transmitter.
“To comply with FCC RF exposure compliance requirements, this grant is applicable to only
Mobile Configurations. The antennas used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter.”
Содержание
- 3 COPYRIGHT & TRADEMARKS; АВТОРСКОЕ ПРАВО И ТОРГОВЫЕ МАРКИ; Спецификации могут меняться без уведомления.; FCC STATEMENT
- 4 СЕРТИФИКАЦИЯ FCC; Изменить положение или передвинуть принимающую антенну.; FCC RF Radiation Exposure Statement
- 6 Country
- 8 ДЕКЛАРАЦИЯ СООТВЕТСТВИЯ; На следующее оборудование:; нормативных документов:; Ян Хунлян
- 9 Менеджер по продукции в сфере международного бизнеса
- 10 CONTENTS
- 11 СОДЕРЖАНИЕ
- 12 50Mbps Wireless N ADSL2+ Modem Router User Guide; Package Contents; Комплект поставки
- 13 Chapter 1 Introduction; Обзор; Thank you for choosing the; Беспроводном; and; фильтрация по; ADSL
- 14 Беспроводная передача данных; Основные характеристики
- 15 Допущения
- 16 Chapter 2 Hardware Installation; Передняя панель; Светодиодные индикаторы, отображающие рабочее состояние; Светодиодная индикация:
- 18 Задняя панель; POWER; : The Power plug is where you will connect the power adapter.; : There are two ways to reset the Router's factory defaults.; RESET; При; Method two; Эти порт используется для подключения маршрутизатора к вашему
- 19 them by an external separate splitter. For details, please refer to; Antenna; Used for wireless operation and data transmit.; Installation Environment; The Router can be placed on a shelf or desktop.; Connecting the Router; Connect the ADSL Line.; Первый; LINE: Connect to the wall jack
- 20 PHONE: Connect to the phone sets; Шаг 2; Power on the computers and LAN devices.; Шаг 4
- 22 Chapter 3 Quick; Настройка компьютера; Click the; Start; menu on your desktop, right click; My Network Places; Right click; Local Area Connection
- 23 Select; General; На закладке; Общие; нажмите; Свойства
- 24 Configure the IP address as Figure 3 -7 shows. After that, click; Настройте; OK
- 25 menu on your desktop, select; run; in the field; on the next screen, and then press; Enter
- 26 Если появившийся результат аналогичен результату,; ) Is the connection between your PC and the Router correct?; Светодиодный индикатор порта LAN, к которому вы подключили; ) Is the TCP/IP configuration for your PC correct?; Вход; После того как ваш узловой компьютер был настроен, проделайте
- 28 Select the connection type to connect to the ISP (We select; Шаг 3; Configure the following options provided by your ISP:; VPI
- 29 Configure the rules for the WLAN, and click; Click; NEXT; to save the current settings.
- 30 CLOSE; чтобы завершить
- 31 Chapter 4 Software; Состояние; Choose “
- 34 provided by your ISP.; ATM VC
- 37 Выберите эту опцию, если ваш Интернет-провайдер
- 40 После того, как вы закончите настройку Интернет, нажмите; Локальная сеть; ” menu, and you will see the LAN screen (shown in Figure 4
- 44 Введите значение; Use Auto Discovered DNS Server Only; is selected in DNS Relay, this Router will accept the; Use User Discovered DNS Server Only; is selected in; SAVE; button to save it and invoke it.; Relay; Выбрав
- 45 Enter the DHCP server IP Address runs on WAN; DHCP Server IP for Relay Agent (IP-адрес DHCP-сервера для агента; If you select; Disabled; , the DHCP function will not take effect.; Беспроводная сеть; ” menu, and you will see the Wireless screen (shown in; Interface Setup→Wireless
- 47 Enter a value between 20-1000 milliseconds. The Beacon Interval; Fragmentation Threshold:; This value specifies the maximum size for a packet before; Access point Settings:; Настройки точки доступа. Здесь можно задать правила
- 48 Select the Bandwidth you want to use from the drop-down List.
- 49 These are the settings of the SSID.; QSS Settings; then you will see the screen as shown below.; Multiple SSIDs Settings:; Select an authentication type from the drop-down list, which
- 50 Из выпадающего списка выберите тип аутентификации для
- 51 Для
- 52 (Advanced Encryption Standard) –симметричный алгоритм блочного
- 58 in the; Access Point PIN
- 59 Расширенные настройки; Advanced Setup
- 60 Межсетевой экран; ” menu, and you will see the next screen (shown in Figure; Маршрутизация; Advanced Setup; ” menu, and you will see the routing information in the next
- 61 button to add a new route in the next screen (shown in Figure 4 -42).; ADD ROUTE; This parameter specifies the IP network address of the final
- 62 NAT; ” menu, you can setup the NAT (Network Address Translation); Advanced Setup; VC. It can be single IP or multiple IPs. We select Multiple to explain.
- 63 Выбрав “
- 64 All the VCs with single IP will use the same Virtual Server rules.; Enter the specific Start and End Port number you want to; Virtual Server Listing:; : Индекс правила виртуального сервера для этого; : Укажите определенные
- 65 For VCs with single IP, select; Single
- 66 Enter the local IP Address you plan to map to. Local Start IP is the; Address Mapping List:; This displays the information about the Mapping addresses.
- 67 is only available for VCs with Multiple IPs.; QoS
- 68 network traffic over various technologies.; Advanced; QoS Settings Summary; button to view the configurations of QoS.
- 71 VLAN; ”, you can activate the VLAN function in the next screen.; ) Assign VLAN PVID for each Interface; Assign VLAN PVID for each Interface; in Figure 4 -48, you can assign the PVID for each
- 72 Каждый физический порт имеет идентификатор; VLAN Group Определение VLAN групп; Define VLAN Group; in Figure 4 -48, you can define VLAN groups in the next screen; Define VLAN Group (Определить VLAN группы); в окне как
- 74 Access Management
- 76 Фильтр
- 77 Select the filter type for the configuration below.
- 78 Выберите направления для данного правила фильтра по IP.; IP/MAC Filter Rule Index; together to appoint; IP/MAC Filter Set Index; вместе; Source IP Address:; means that all IP addresses are controlled by the rule.; Destination IP Address:; Enter the destination IP address for the rule. You can enter
- 80 If you want to make the rule take effect, please select; Yes; Select the Protocol as “TCP” and select the Unmatched rule as “Next”.; to view the information about the rule.
- 81 Если вы хотите, чтобы правило применялось, выберите; порта” в соответствующих полях.; Шаг 6; : Вернитесь к Шагу 2 для того, чтобы настроить следующие два правила:; IP / MAC Filter Set Index; для того, чтобы посмотреть информацию о
- 88 SNMP
- 89 the UPnP take effect.; ”, you can configure the DDNS function in the screen; DDNS; Маршрутизатор предлагает возможность использования
- 90 CWMP; Access Management
- 92 Эксплуатация устройства; Администрирование; Maintenance; to make the new password take effect.; Часовой пояс; Maintenance
- 93 as the Synchronize time, you only need to set the time zone.; NTP Server automatically; PC’s Clock; as the Synchronize time, you don’t need to set any items.; PC’s
- 94 Manually; Встроенное ПО; ”, you can upgrade the firmware of the Router in the screen; Browse; to find the local hard drive and locate the firmware or
- 95 button to locate the update file.; UPGRADE; New firmware versions are posted at
- 96 ROMFILE SAVE; button in the next; Шаг 1; : Нажмите на кнопку; ROMFILE; : Сохраните файл как
- 97 файл обновления, или введите точный путь к нему.; Перезагрузка системы; Диагностика
- 98 given host or gateway.
- 99 Справка; Help; »), вы сможете просмотреть информацию о том, как настроить любую
- 100 Нажав на закладку, вы получите соответствующую информацию.
- 102 Приложение A: Спецификация; Общие параметры