Роутеры TP-Link TD-W8151N - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice.
is a registered trademark of
TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or
registered trademarks of their respective holders.
No part of the specifications may be reproduced in any form or by any means or used to make
any derivative such as translation, transformation, or adaptation without permission from TP-
LINK TECHNOLOGIES CO., LTD. Copyright © 2010 TP-LINK TECHNOLOGIES CO., LTD. All
rights reserved.
АВТОРСКОЕ ПРАВО И ТОРГОВЫЕ МАРКИ
Спецификации могут меняться без уведомления.
является
зарегистрированной торговой маркой компании «TP-LINK TECHNOLOGIES CO., LTD».
Прочие бренды и наименования продукции являются торговыми марками или
зарегистрированными торговыми марками их владельцев.
Спецификации не могут быть воспроизведены в какой-либо форме или посредством каких-
либо средств или использованы для составления производных материалов с помощью
перевода, трансформации или переработки настоящей публикации при отсутствии
разрешения от компании «TP-LINK TECHNOLOGIES CO., LTD». Copyright © 2010 TP-LINK
TECHNOLOGIES CO., LTD. Все права защищены.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not in-stalled and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1)
This device may not cause harmful interference.
2)
This device must accept any interference received, including interference that may
cause undesired operation.
Содержание
- 3 COPYRIGHT & TRADEMARKS; АВТОРСКОЕ ПРАВО И ТОРГОВЫЕ МАРКИ; Спецификации могут меняться без уведомления.; FCC STATEMENT
- 4 СЕРТИФИКАЦИЯ FCC; Изменить положение или передвинуть принимающую антенну.; FCC RF Radiation Exposure Statement
- 6 Country
- 8 ДЕКЛАРАЦИЯ СООТВЕТСТВИЯ; На следующее оборудование:; нормативных документов:; Ян Хунлян
- 9 Менеджер по продукции в сфере международного бизнеса
- 10 CONTENTS
- 11 СОДЕРЖАНИЕ
- 12 50Mbps Wireless N ADSL2+ Modem Router User Guide; Package Contents; Комплект поставки
- 13 Chapter 1 Introduction; Обзор; Thank you for choosing the; Беспроводном; and; фильтрация по; ADSL
- 14 Беспроводная передача данных; Основные характеристики
- 15 Допущения
- 16 Chapter 2 Hardware Installation; Передняя панель; Светодиодные индикаторы, отображающие рабочее состояние; Светодиодная индикация:
- 18 Задняя панель; POWER; : The Power plug is where you will connect the power adapter.; : There are two ways to reset the Router's factory defaults.; RESET; При; Method two; Эти порт используется для подключения маршрутизатора к вашему
- 19 them by an external separate splitter. For details, please refer to; Antenna; Used for wireless operation and data transmit.; Installation Environment; The Router can be placed on a shelf or desktop.; Connecting the Router; Connect the ADSL Line.; Первый; LINE: Connect to the wall jack
- 20 PHONE: Connect to the phone sets; Шаг 2; Power on the computers and LAN devices.; Шаг 4
- 22 Chapter 3 Quick; Настройка компьютера; Click the; Start; menu on your desktop, right click; My Network Places; Right click; Local Area Connection
- 23 Select; General; На закладке; Общие; нажмите; Свойства
- 24 Configure the IP address as Figure 3 -7 shows. After that, click; Настройте; OK
- 25 menu on your desktop, select; run; in the field; on the next screen, and then press; Enter
- 26 Если появившийся результат аналогичен результату,; ) Is the connection between your PC and the Router correct?; Светодиодный индикатор порта LAN, к которому вы подключили; ) Is the TCP/IP configuration for your PC correct?; Вход; После того как ваш узловой компьютер был настроен, проделайте
- 28 Select the connection type to connect to the ISP (We select; Шаг 3; Configure the following options provided by your ISP:; VPI
- 29 Configure the rules for the WLAN, and click; Click; NEXT; to save the current settings.
- 30 CLOSE; чтобы завершить
- 31 Chapter 4 Software; Состояние; Choose “
- 34 provided by your ISP.; ATM VC
- 37 Выберите эту опцию, если ваш Интернет-провайдер
- 40 После того, как вы закончите настройку Интернет, нажмите; Локальная сеть; ” menu, and you will see the LAN screen (shown in Figure 4
- 44 Введите значение; Use Auto Discovered DNS Server Only; is selected in DNS Relay, this Router will accept the; Use User Discovered DNS Server Only; is selected in; SAVE; button to save it and invoke it.; Relay; Выбрав
- 45 Enter the DHCP server IP Address runs on WAN; DHCP Server IP for Relay Agent (IP-адрес DHCP-сервера для агента; If you select; Disabled; , the DHCP function will not take effect.; Беспроводная сеть; ” menu, and you will see the Wireless screen (shown in; Interface Setup→Wireless
- 47 Enter a value between 20-1000 milliseconds. The Beacon Interval; Fragmentation Threshold:; This value specifies the maximum size for a packet before; Access point Settings:; Настройки точки доступа. Здесь можно задать правила
- 48 Select the Bandwidth you want to use from the drop-down List.
- 49 These are the settings of the SSID.; QSS Settings; then you will see the screen as shown below.; Multiple SSIDs Settings:; Select an authentication type from the drop-down list, which
- 50 Из выпадающего списка выберите тип аутентификации для
- 51 Для
- 52 (Advanced Encryption Standard) –симметричный алгоритм блочного
- 58 in the; Access Point PIN
- 59 Расширенные настройки; Advanced Setup
- 60 Межсетевой экран; ” menu, and you will see the next screen (shown in Figure; Маршрутизация; Advanced Setup; ” menu, and you will see the routing information in the next
- 61 button to add a new route in the next screen (shown in Figure 4 -42).; ADD ROUTE; This parameter specifies the IP network address of the final
- 62 NAT; ” menu, you can setup the NAT (Network Address Translation); Advanced Setup; VC. It can be single IP or multiple IPs. We select Multiple to explain.
- 63 Выбрав “
- 64 All the VCs with single IP will use the same Virtual Server rules.; Enter the specific Start and End Port number you want to; Virtual Server Listing:; : Индекс правила виртуального сервера для этого; : Укажите определенные
- 65 For VCs with single IP, select; Single
- 66 Enter the local IP Address you plan to map to. Local Start IP is the; Address Mapping List:; This displays the information about the Mapping addresses.
- 67 is only available for VCs with Multiple IPs.; QoS
- 68 network traffic over various technologies.; Advanced; QoS Settings Summary; button to view the configurations of QoS.
- 71 VLAN; ”, you can activate the VLAN function in the next screen.; ) Assign VLAN PVID for each Interface; Assign VLAN PVID for each Interface; in Figure 4 -48, you can assign the PVID for each
- 72 Каждый физический порт имеет идентификатор; VLAN Group Определение VLAN групп; Define VLAN Group; in Figure 4 -48, you can define VLAN groups in the next screen; Define VLAN Group (Определить VLAN группы); в окне как
- 74 Access Management
- 76 Фильтр
- 77 Select the filter type for the configuration below.
- 78 Выберите направления для данного правила фильтра по IP.; IP/MAC Filter Rule Index; together to appoint; IP/MAC Filter Set Index; вместе; Source IP Address:; means that all IP addresses are controlled by the rule.; Destination IP Address:; Enter the destination IP address for the rule. You can enter
- 80 If you want to make the rule take effect, please select; Yes; Select the Protocol as “TCP” and select the Unmatched rule as “Next”.; to view the information about the rule.
- 81 Если вы хотите, чтобы правило применялось, выберите; порта” в соответствующих полях.; Шаг 6; : Вернитесь к Шагу 2 для того, чтобы настроить следующие два правила:; IP / MAC Filter Set Index; для того, чтобы посмотреть информацию о
- 88 SNMP
- 89 the UPnP take effect.; ”, you can configure the DDNS function in the screen; DDNS; Маршрутизатор предлагает возможность использования
- 90 CWMP; Access Management
- 92 Эксплуатация устройства; Администрирование; Maintenance; to make the new password take effect.; Часовой пояс; Maintenance
- 93 as the Synchronize time, you only need to set the time zone.; NTP Server automatically; PC’s Clock; as the Synchronize time, you don’t need to set any items.; PC’s
- 94 Manually; Встроенное ПО; ”, you can upgrade the firmware of the Router in the screen; Browse; to find the local hard drive and locate the firmware or
- 95 button to locate the update file.; UPGRADE; New firmware versions are posted at
- 96 ROMFILE SAVE; button in the next; Шаг 1; : Нажмите на кнопку; ROMFILE; : Сохраните файл как
- 97 файл обновления, или введите точный путь к нему.; Перезагрузка системы; Диагностика
- 98 given host or gateway.
- 99 Справка; Help; »), вы сможете просмотреть информацию о том, как настроить любую
- 100 Нажав на закладку, вы получите соответствующую информацию.
- 102 Приложение A: Спецификация; Общие параметры