Bosch MFW 3X14B (W) - Инструкция по эксплуатации - Страница 27

 27

en

Care and daily cleaning

4. 

Fit the threaded ring onto the housing 
and screw tight in the clockwise 
direction without using force.

5. 

Place the outlet funnel onto the filter 
holder until it audibly clicks into place.

6. 

Screw pulp nozzle into the filter holder.

The fruit press attachment is now prepared.

Use

W

Warning 

Risk of injury!

Do not reach into the feed chute with your 
hands.

Caution!

–

Remove hard fruit peel, pips and stalks.

–

Berries such as e.g. currants can be 
pressed together with their stalks. 

–

Fruit with larger pips and stones such as 
e.g. plums and cherries must have their 
pips or stones removed before juicing.

–

Do not process frozen fruit.

–

Do not apply great force with the pusher.

X

Fig. 

N

1. 

Fit the prepared attachment onto the 
drive of the base unit, holding it at an 
angle.

2. 

Turn the attachment anticlockwise until 
you hear it click into position. Tighten 
threaded ring.

3. 

Fit the filling tray and insert the pusher 
in the feed chute.

4. 

Prepare the fruit. Chop up large fruit 
beforehand so it fits into the feed 
chute without having to be pressed in. 
Remove larger pips and stones (e.g. 
cherries, plums).

■

Place one container under each of the 
apertures for juice and for the pulp.

■

Add the prepared fruit to the filling tray.

5. 

Connect the mains plug. Switch on the 
appliance. 

6. 

Use the pusher to slide the fruit down 
the feed chute, applying light pressure. 

7. 

The pressed juice flows out from 
the outlet funnel. The pulp (solid 
components) is pressed through the 
pulp nozzle. 

8. 

Adjust the pulp nozzle. Unscrewing 
makes the pulp more moist; screwing 
in makes it dryer and more juice flows 
from the funnel. If the pulp is too dry, 
unscrew the nozzle, to avoid clogging 
the appliance with the pulp.

9. 

Once you have finished, switch off the 
appliance and pull out the mains plug.

10. 

Remove the filling tray and pusher.

11. 

Hold down the release button and 
turn the attachment clockwise until it 
disengages.

■

Remove the attachment, take it apart 
and clean all parts. 

X

 “Care and daily 

cleaning” see page 27

12. 

To remove the filter insert, insert the 
hook into the hole in the filter insert and 
carefully extract.

Caution!

Pay special attention to the juice squeezing 
process. Make sure filter openings are not 
clogged. Clogging of the housing outlet 
with the pulp of juicy fruits can cause the 
flooding of the drive unit.
If the housing outlet becomes clogged, 
switch off the appliance and pull out the 
mains plug. Remove the attachment, take it 
apart and clean all parts. 

X

 “Care and daily 

cleaning” see page 27

Care and daily cleaning

The appliance, all attachments and the 
relevant accessories must be thoroughly 
cleaned after each use.

W

Risk of electric shock!

–

Disconnect the mains cable from the 
socket prior to cleaning.

–

Never immerse the base unit in liquids 
and do not clean in the dishwasher.

W

Risk of injury!

Do not reach into the sharp blades and 
edges of the shredding and slicing inserts. 
Clean them with a brush.