Bosch MFW 3X14B (W) - Инструкция по эксплуатации - Страница 25

 25

en

Citrus press attachment

Citrus press attachment

For squeezing juice out of citrus fruits, 
e.g. lemons, oranges, grapefruits.

Preparation

W

Risk of injury!

The attachment for the citrus press is 
directly assembled on the base unit. Do not 
insert the mains plug until all preparations 
for working with the appliance are complete.

Caution!

The base unit is moved through 90° for 
preparation and use of the citrus press 
attachment. Never use other attachments in 
this position.

X

Fig. 

I

1. 

Hold the base unit by the carrying 
handle and carefully tip up so the 
drive points upwards. Possibly turn the 
base unit to make the buttons easily 
accessible.

2. 

Insert the driving shaft with the spring 
element pointing down in the drive of the 
base unit.

Caution!

It should be possible to push the driving 
shaft down lightly with your finger. It must 
not get sticky with residue from juice or 
become blocked with pips or foreign bodies.

3. 

Fit the collecting tray onto the drive at an 
angle.

4. 

Turn the collecting tray anticlockwise until 
you hear it click into position.

5. 

Fit the filter insert onto the collecting tray.

6. 

Fit the pressing cone onto the driving 
shaft.

The citrus press attachment is now fitted to 
the base unit and prepared.

Use

X

Fig. 

J

1. 

Cut the citrus fruits in half.

2. 

Place a suitable container under the 
attachment.

3. 

Connect the mains plug. Switch on the 
appliance. The drive is running.

Caution! (MFW3X...) 

After switching on, the appliance runs at 
speed 

2

 (fast). To use the citrus press, you 

must press button 

+

 once to switch 

to speed 

1

 (slow). 

X

 “Speed setting” see 

page 22

4. 

Position the halved citrus fruits with 
the cut surface on the pressing cone 
and press down. As soon as the fruit 
is pressed onto the pressing cone, the 
cone will rotate.

5. 

To finish the process, reduce the 
pressure on the cone.

6. 

Once you have finished, switch off the 
appliance and pull out the mains plug.

7. 

Hold down the release button and 
turn the attachment clockwise until it 
disengages.

8. 

Remove the attachment, take it apart 
and clean all parts. 

X

 “Care and daily 

cleaning” see page 27

Notes:

–

To obtain the largest amount of juice, 
the pressing procedure should be 
repeated a few times.

–

The filter insert with the pulp and pips 
should be emptied as necessary.

Grain mill attachment

For grinding products such as wheat, 
oats, rice, coffee beans, peppercorns, 
wild mustard, walnuts, hazel nuts, dried 
mushrooms, almonds, soya, linseeds, 
buckwheat groats, shelled sunflower seeds, 
etc. The appliance is not intended to be 
used for grinding very hard products such 
as dried peas, maize or popcorn. 

X

 “Tips” 

see page 28

Preparation

X

Fig. 

K

1. 

Place the adjustment screw in the 
setting ring. Ensure that the scale points 
upwards.

2. 

Press the adjustment screw towards the 
grinding chamber and turn the setting 
ring in a clockwise direction until the 
scale for the grinding level is reached.