Bosch MFW 3X14B (W) - Инструкция по эксплуатации - Страница 22

22 

en

Overload protection 

All models

Operation indicator

The operation indicator lights up when the 
appliance is switched on. On models with 
the reversing function the function indicator 
flashes for as long as the 

+

button is 

pressed.

Release button

Press the release button to unlock an 
attachment fitted on the appliance. Only 
when the release button is pressed is it 
possible to turn the attachment clockwise 
and remove it from the base unit.

Cable storage compartment

The mains cable can be pulled out of the 
cable storage compartment or pushed back 
in again. Only ever pull the cable out as 
much as is required.

Storage compartment

Unused perforated discs belonging to the 
meat mincer can be kept in the storage 
compartment and it closed with the cover.

Overload protection

To prevent serious damage to your 
appliance if the base attachment is 
overloaded, the agitator paddle has a 
notch (predetermined breaking point). If 
overloading occurs, the agitator paddle 
will break at this point. A new agitator 
paddle is available from Customer 
Service (No. 10005188). Spare parts with 
a predetermined breaking point are not 
covered by our warranty obligations.

Replace agitator paddle

X

Fig. 

B

1. 

Release the screw in the agitator paddle 
with a screwdriver (PH2) and remove 
the faulty paddle.

2. 

Fit a new agitator paddle and screw tight 
again.

Speed setting

ONLY MFW3X...

Using the speed setting feature, the speed 
can be set to 

1

 (slow) or 

2

 (fast).

Caution!

For certain applications, it is imperative 
to use speed 

1

 (slow). Take note of the 

recommended speeds! See table 

X

Fig.

P

■

Switch on the appliance with button 

k

. 

The appliance will run at speed 

2

 (fast).

■

Press button 

+

briefly. The 

appliance will switch to speed 

1

 (slow).

■

Press button 

+

briefly. The 

appliance will switch back to speed 

2

(fast).

Reversing function

ONLY MFW3X...

The reversing function is designed to 
release food that has got stuck by briefly 
running the worm gear in reverse. The 
reversing function switches off automatically 
after 15 seconds.

Caution!

–

Never use the reverse function with the 
grain mill attachment or the fruit press 
attachment!

–

Never press and hold button 

+

continuously while the appliance is 
switched on. Only press and hold 
button 

+

 continuously once the 

appliance has come to a complete stop. 

■

Switch the appliance off with button 

k

and wait until the drive has stopped.

■

Press and hold button 

+

. 

■

After approx. 5-10 seconds, release 
button 

+

and wait for the drive to 

come to a standstill.

■

Switch the appliance on again with 
button 

k

.

Note: 

If food that has got stuck is not 

released by briefly putting the appliance into 
reverse, switch the appliance off, unplug 
and clean it. 

X

 “Care and daily cleaning” 

see page 27