Daikin FWT-CT - Инструкция по эксплуатации - Страница 12

1-10

When The Unit Is Not To Be Used For An Extended Long Period Of Time

For any enquiries on spare part please contact your authorized dealer. When any malfunction of the air conditioner 
unit is noted, immediately switch off the power supply to the unit. Check the following fault conditions and causes for 
some simple troubleshooting tips.

If the fault persists, please call your local dealer / serviceman.

TROUBLESHOOTING

Fault

Causes / Action

The air conditioner unit does not operate.

1.

Power failure, or the fuse needs to be replaced.
The power plug is disconnected.
 It is possible that your delay timer has been set 
incorrectly.
 If the fault persist after all these veri

fi

 cations,  please 

contact the air conditioner unit installer.

–
–
–

–

The air 

fl

 ow is too low.

2.

The air 

fi

 lter is dirty.

The doors or windows are open.
The air suction and discharge are clogged.
The regulated temperature is not high enough.

–
–
–
–

Discharge air 

fl

 ow has bad odour.

3.

 Odours may be caused by cigarettes, smoke particles, 
perfume etc. which might have adhered onto the coil.

–

Condensation on the front air grille of the indoor unit.

4.

 This is caused by air humidity after an extended long period 
of operation.
 The set temperature is too low, increase the temperature 
setting and operate the unit at high fan speed.

–

–

Water 

fl

 owing out from the air conditioner unit.

5.

Switch off unit and call dealer.

–

Operate the unit for 2 hours with 
the following setting.

Operating mode : cool
Temperature : 30°C/86°F

Remove the power plug.
If you are using an 
independent electric 
circuit for your unit, cut 
off the circuit.
Remove the batteries in 
the remote control.

1 IM-WMJW-0312(0)DKdenv_EN.indd   10

1 IM-WMJW-0312(0)DKdenv_EN.indd   10

5/21/12   9:21:49 AM

5/21/12   9:21:49 AM