Bosch UniversalChain 18 0.600.8B8.001 - Инструкция по эксплуатации - Страница 16

16

 | English 

F 016 L81 719 | (21.12.17)

Bosch Power Tools

earthed (grounded) power tools. 

Unmodified plugs and 

matching outlets will reduce risk of electric shock.



Avoid body contact with earthed or grounded surfaces, 
such as pipes, radiators, ranges and refrigerators. 

There is an increased risk of electric shock if your body is 
earthed or grounded.



Do not expose power tools to rain or wet conditions. 

Water entering a power tool will increase the risk of electric 
shock.



Do not abuse the cord. Never use the cord for carrying, 
pulling or unplugging the power tool. Keep cord away 
from heat, oil, sharp edges and moving parts. 

Damaged 

or entangled cords increase the risk of electric shock.



When operating a power tool outdoors, use an 
extension cord suitable for outdoor use. 

Use of a cord 

suitable for outdoor use reduces the risk of electric shock.



If operating a power tool in a damp location is 
unavoidable, use a residual current device (RCD) 
protected supply. 

Use of an RCD reduces the risk of 

electric shock.

Personal safety



Stay alert, watch what you are doing and use common 
sense when operating a power tool. Do not use a power 
tool while you are tired or under the influence of drugs, 
alcohol or medication. 

A moment of inattention while 

operating power tools may result in serious personal injury.



Use personal protective equipment. Always wear eye 
protection. 

Protective equipment such as dust mask, 

non-skid safety shoes, hard hat, or hearing protection 
used for appropriate conditions will reduce personal 
injuries.



Prevent unintentional starting. Ensure the switch is in 
the off-position before connecting to power source 
and/or battery pack, picking up or carrying the tool. 

Carrying power tools with your finger on the switch or 
energising power tools that have the switch on invites 
accidents.



Remove any adjusting key or wrench before turning 
the power tool on. 

A wrench or a key left attached to a 

rotating part of the power tool may result in personal 
injury.



Do not overreach. Keep proper footing and balance at 
all times. 

This enables better control of the power tool in 

unexpected situations.



Dress properly. Do not wear loose clothing or 
jewellery. Keep your hair, clothing and gloves away 
from moving parts. 

Loose clothes, jewellery or long hair 

can be caught in moving parts.



If devices are provided for the connection of dust 
extraction and collection facilities, ensure these are 
connected and properly used. 

Use of dust collection can 

reduce dust-related hazards.

Power tool use and care



Do not force the power tool. Use the correct power tool 
for your application. 

The correct power tool will do the 

job better and safer at the rate for which it was designed.



Do not use the power tool if the switch does not turn it 
on and off. 

Any power tool that cannot be controlled with 

the switch is dangerous and must be repaired.



Disconnect the plug from the power source and/or the 
battery pack from the power tool before making any 
adjustments, changing accessories, or storing power 
tools. 

Such preventive safety measures reduce the risk of 

starting the power tool accidentally.



Store idle power tools out of the reach of children and 
do not allow persons unfamiliar with the power tool or 
these instructions to operate the power tool. 

Power 

tools are dangerous in the hands of untrained users.



Maintain power tools. Check for misalignment or 
binding of moving parts, breakage of parts and any 
other condition that may affect the power tool’s 
operation. If damaged, have the power tool repaired 
before use. 

Many accidents are caused by poorly 

maintained power tools.



Keep cutting tools sharp and clean. 

Properly maintained 

cutting tools with sharp cutting edges are less likely to bind 
and are easier to control.



Use the power tool, accessories and tool bits etc. in 
accordance with these instructions, taking into 
account the working conditions and the work to be 
performed. 

Use of the power tool for operations different 

from those intended could result in a hazardous situation.

Battery tool use and care



Recharge only with the charger specified by the 
manufacturer. 

A charger that is suitable for one type of 

battery pack may create a risk of fire when used with 
another battery pack.



Use power tools only with specifically designated 
battery packs. 

Use of any other battery packs may create 

a risk of injury and fire.



When battery pack is not in use, keep it away from 
other metal objects, like paper clips, coins, keys, nails, 
screws or other small metal objects, that can make a 
connection from one terminal to another. 

Shorting the 

battery terminals together may cause burns or a fire.



Under abusive conditions, liquid may be ejected from 
the battery; avoid contact. If contact accidentally 
occurs, flush with water. If liquid contacts eyes, 
additionally seek medical help. 

Liquid ejected from the 

battery may cause irritation or burns.

Service



Have your power tool serviced by a qualified repair 
person using only identical replacement parts. 

This will 

ensure that the safety of the power tool is maintained.

Chain Saw Safety Warnings



Keep all parts of the body away from the saw chain 
when the motor is operating. Before you start the chain 
saw, make sure the saw chain is not contacting 
anything. 

A moment of inattention while operating chain 

OBJ_BUCH-3472-001.book  Page 16  Thursday, December 21, 2017  4:11 PM