FALMEC Quantum (600) - Инструкция по эксплуатации - Страница 19

19

ENGLISH

OPERATION AND 

USE OF THE COOKTOP

ONLY USE COOKWARE SUITABLE FOR INDUCTION HOBS. 

When a cooking are is turned on, the bottom of the saucepan heats.

The cooking area only heats thanks to the heat given by the saucepan.

The cooktop automatically detects the size of the saucepan.

The heating power is to be chosen based on what shall be cooked.

Please 

fi

nd below a short table:

SETTING AREAS

1 - 2

Melt

Heat

Sauces, butter, chocolate, 

gelatine

Precooked dishes

2 - 3

Whisk

Defrost

Rice, pudding and cooked 

dishes

Vegetables, 

fi

sh, frozen food

3 - 4

Steam

Vegetables, 

fi

sh, meat

4 - 5

Boil

Boiled potatoes, soups, pasta

Fresh vegetables

6 - 7

Cook over a low heat

Meat, liver, eggs, sausages

Goulash, rolate, tripe

7 - 8

Cook

Fry

Potatoes, donuts, cakes

9

Fry, bring to the boil

Steaks, omelettes

Boil

P

Fry, bring to the boil

Bring to the boil big 

quantities of water

Remark: heating time of cooktops is shorter than the gas cookers.

BASIC FUNCTIONS

See table of the corresponding model in the previous page.

BRIDGE FUNCTION

This function allows having cooking areas 1-2 and/or 3-4 working at the same time.

To enable:

- Enable the cooktop;

press simultaneously the symbols 

+

::

- the symbol 

(solo

display

destro)

 will be displayed on the screen of the front cooking area;

- Push the keys + and – to set power.

Note: this function can only be activated between the 2 right or the 2 left plates (not the 

two centre plates).

DEACTIVATION of the BRIDGE function:

press simultaneously the symbols 

+

:.

BOOSTER FUNCTION 

The Booster strengthens power, so that big quantities can be heated (e.g. water to cook 

pasta).

This power increase is enabled for max. 10 minutes.

- Turn on the cooker;

- select the cooking area;

- touch (+) until on the screen   is displayed on the back cooking area.

Note: it is not possible to only set to   one right or one left plate at the time (and 

no more than 2 in total).
If the 1 (4) is set to  , the one near 2(3) cannot be set to exceed the   level.
If the 2(3) plate is set to  , the 1(4) one switches o

ff

.

KEEP WARM FUNCTION

42°C - Keeping temperature of cooked dishes:

Turn on the cooker;

Select the cooking area;

Touch (+) and then (-):  the   

symbol will appear.

Shutdown of the cooker

To shutdown the cooking area:

Touch the key ( - ) until 0 is displayed on the screen of the cooking area. 

If the cooking area is still too hot, the residual heat is speci

fi

ed  .

Turn o

ff

 the cooker

Touch the key 

 : all cooking areas are deactivated.

On the display of the cooking areas that are still too hot, the symbol is displayed  .

Do not touch the cooking areas until the lamp 

 is on.

TIMER FUNCTION AND AUTOMATIC 

SHUTDOWN FOR THE COOKER

The timer has two functions:

1 – 

TIMER

;

2 – 

AUTOMATIC SHUTDOWN

 of one or more cooking areas.

It is possible to set a duration up to 99 minutes.

Once the time set is over, on the display regarding time 00 is shown and a sound warn-

ing is activated that can be deactivated pushing keys (+) or (-).

TIMER

To set:
1. If o

ff

, turn the hob on using the  

  key and touch (+) and (-) at the same time.

2. Set the desired time touching keys (+) and (-).

Timer starts passing.

To modify time repeat the procedure from point 1.

To cancel timer:

1. If o

ff

, turn the hob on and touch (+) and (-) at the same time.

(on the Plus version the lamp is on 

).

2. Touch the key ( - ) to bring time to 00.

AUTOMATIC SHUTDOWN

For the automatic shutdown function:

1 - turn on the cooker;

2 - select the cooking area;

3 - select the level;

4 - set the timer as described above.

To  set  the  automatic  shutdown  for  another  cooking  area,  repeat  the  procedure  from 

point 2.

TIMER

 and 

AUTOMATIC SHUTDOWN

 can be used simultaneously.