Yamaha R-840 - Инструкция по эксплуатации - Страница 96

38

 En

DVD SETUP MENU OPTIONS

2

Select “Video Adjust”, and then press 
ENTER.

The Video Adjust menu appears on-screen.

3

Use 

/ / /   and  ENTER  to  select  and 

change the settings.

The settings are explained below.
The Brightness, Contrast, Hue, and Chroma Level 
settings can be adjusted by using  / .

4

Press SETUP to close the Setup menu.

■

Sharpness

Adjusts the sharpness of edges in the picture.
• Fine, Standard (default), Soft.

■

Brightness

Adjusts the brightness of the picture.
• –20 to +20 (default: 0)

■

Contrast

Adjusts the contrast between the lightest and darkest areas 
of the picture.
• –16 to +16 (default: 0)

■

Gamma

Adjusts the appearance of dark areas of the picture.
• High, Medium, Low, Off (default).

■

Hue

Adjusts the balance between green and red.
• green 9 to red 9 (default: 0)

■

Chroma Level

Adjusts the color saturation.
• –9 to +9 (default: 0)

Notes

• The effects of the Video Adjust settings depends on the source 

material and your TV, and in some cases may not be that visible.

• The Sharpness setting does not apply to video output by the 

HDMI jack.

The Initial Settings menu contains digital audio output, 
video, language, display, and other settings.
When a menu item is grayed out, it means that it cannot 
currently be changed. The Initial Settings cannot be 
changed during disc playback.

1

Press DISC and then SETUP.

The Setup menu appears on-screen.

2

Select “Initial Settings”, and then press 
ENTER.

The Initial Settings menu appears on-screen.

3

Use  / / /  and ENTER to select and 
change the settings.

The settings are explained below.

Notes

• The HDMI Resolution and HDMI Color settings only need to 

be changed if you’ve connected an HDMI component to the 
HDMI jack.

• The Component Out settings cannot be changed if you’ve 

connected an HDMI component to the HDMI jack.

• The Component Out settings may change automatically due to 

the HDMI Resolution and HDMI Color settings.

• While HDMI Audio is set to on (

☞

p.15), or a component is 

connected to the HDMI jack, only the Digital Out setting is 
available.

• When HDMI Audio is set to on (

☞

p.15), 96 kHz PCM is 

downsampled to 48 kHz regardless of the 96 kHz PCM Out 
setting.

■

Digital Audio Out settings

Digital Out

Turns the OPTICAL DIGITAL OUT on and off.
•

On (default)

: OPTICAL DIGITAL OUT is on.

•

Off

: OPTICAL DIGITAL OUT is off.

Dolby Digital Out

Turns Dolby Digital to PCM conversion on and off. If 
you’ve connected the OPTICAL DIGITAL OUT to your 
AV receiver/decoder and it doesn’t support Dolby Digital, 
select Dolby Digital > PCM.
•

Dolby Digital (default)

: Dolby Digital signals are 

output as they are.

•

Dolby Digital > PCM

: Dolby Digital signals are 

converted and output as 2-channel PCM.

Sharpness

Brightness

Contrast

Gamma

Hue

Chroma Level

Video Adjust

Fine

Standard

Soft

Brightness

min

max

0

Initial Settings menu

Video Output

Language

Display

Options

Initial Settings

Digital Audio Out

Digital Out

Dolby Digital Out

DTS Out

96 kHz PCM Out

MPEG Out

On

Dolby Digital

DTS
96kHz > 48kHz

MPEG > PCM