Yamaha R-840 - Инструкция по эксплуатации - Страница 71

PREPARATIONS

13

 En

Eng

lish

PREP

ARA

TION

Before starting playback operation, follow the procedure 
below to adjust the clock setting of the receiver.

Notes

• Use the remote control to set the clock. You cannot set the clock 

with the buttons on the receiver.

• The receiver supports 24-hour clock display.
• If you do not touch any key for 90 seconds, the receiver returns 

to normal mode.

1

Press   to turn the receiver on.

The front panel display lights up.

2

Press TIMER to show the current time.

If the clock is not set, “SET TIME” flashes on the 
display. 
Press ENTER to proceed to step 3.

3

Press  /  to select “TIME”, and press 
ENTER.

The receiver enters clock setting mode. The hour 
digits start flashing.

4

Set the hour using  / , and press  .

The minute digits start flashing.

5

Set the minutes using  / , and press 
ENTER.

The hour and minute digits start flashing. 
To change the hour or minutes again, press   or  , 
do steps 4 and 5, and proceed to step 6.

6

Press ENTER.

The clock is set. 
The hour and minute segments stop flashing and 
remain on. The receiver returns to normal mode.

y

You can return to the previous screen by pressing 

 or 

RETURN.

Adjusting the Clock

TIMER

ENTER

, 

RETURN

Flashes

Flashes

Flashes