Yamaha R-840 - Инструкция по эксплуатации - Страница 95

37

 En

Eng

lish

O

T

HE
R 

OP

ERA

T

IO

NS

This chapter explains the Audio Settings menu, the Video Adjust and Initial Settings menus.

These settings only affect disc playback.

1

Press DISC and then SETUP.

The Setup menu appears on-screen.

2

Select “Audio Settings”, and then press 
ENTER.

The Audio Settings menu appears on-screen.

3

Use 

/

/

/

and ENTER to select and 

change the settings.

The settings are explained below.

4

Press SETUP to close the Setup menu.

Note

The effects of the Audio settings depends on your speakers, TV, 
and AV receiver’s volume level and other settings. For each 
setting, switch between the available options and choose the one 
that provides the best results.

■

Audio DRC

The Audio DRC (Dynamic Range Control) function 
makes loud sounds quieter and quiet sounds louder, which 
is ideal for watching movies late at night when you don’t 
want to disturb anyone.
• High, Medium, Low, Off (default).

Notes

• Audio DRC only works with Dolby Digital sources.
• With some discs, Audio DRC may have little or no effect.
• The Audio DRC function also applies to digital output signals 

when the Digital Out setting is set to On and the Dolby Digital 
Out setting is set to Dolby Digital > PCM. See page 38 for 
details on the digital audio output settings.

• The Audio DRC function also applies to audio output from the 

HDMI output, with the same restrictions as above.

■

Dialog

When watching a movie or other material on a DVD-
Video disc, depending on the audio format, the center 
channel may be too quiet and difficult to hear. With the 
Dialog function, you can make the dialog louder and 
easier to hear.
• High, Medium, Low, Off (default).

Notes

• When using the Dialog function, depending on the source 

material, the dialog may distort, in which case you should select 
a lower setting.

• The Dialog function also applies to digital output signals that 

have been converted to 2-channel PCM. See page 38 for details 
on the digital audio output settings.

• The Dialog function also applies to audio output from the 

HDMI output, with the same restrictions as above.

The Video Adjust settings affect the TV picture.

1

Press DISC and then SETUP.

The Setup menu appears on-screen.

Note

The Video Adjust menu is only available when DVD is selected 
as an input source.

DVD SETUP MENU OPTIONS

Audio Settings menu

SETUP

,  , , ,

ENTER

Audio Settings

Audio DRC

Dialog

High 

Medium 

Low

Off

Video Adjust menu

SETUP

,  , , ,

ENTER

Numeric keys