Yamaha R-840 - Инструкция по эксплуатации - Страница 90

32

 En

RADIO DATA SYSTEM TUNING (EUROPE AND RUSSIA MODELS ONLY)

Use this feature to receive the TP (traffic program) data 
service of the Radio Data System station network.

1

Tune into the desired Radio Data System 
broadcasting station.

2

Press TP.

“TP SEARCH” flashes on the front panel display for 
about three seconds, and the search starts. 
The TP indicator on the receiver flashes during 
search. 
When the traffic program is received, the TP indicator 
stays on and the search stops. 
If you press TP, the search starts again. 

If the receiver fails to receive the traffic program, the 
TP indicator turns off and “NO TP” appears on the 
display. The receiver returns to its previous state.

To cancel the search

Press TP during search.

You can use the CT information received from the Radio 
Data System stations to adjust the built-in clock of the 
receiver.

1

Press OPTION.

An option menu item appears on the front panel 
display.

2

Press  /  to select “AUTO CLOCK”, and 
press ENTER.

3

Press  /  to select “ON” or “OFF”, and 
press ENTER.

The “AUTO CLOCK” status is displayed. 
The default setting is “ON”.

ON: Automatically adjusts the receiver clock using 
the CT information.
OFF: Does not adjust the receiver clock.

To exit the option menu

Press OPTION.

Using the TP (traffic program) data 
service

INPUT

BASS

PHONES

VOLUME

MIN

MAX

TREBLE

BALANCE

PRESET

PURE DIRECT 

L

R

TIMER

TP

TP indicator

TP

CT (clock time) settings