Yamaha R-840 - Инструкция по эксплуатации - Страница 112

54

 En

SPECIFICATIONS

iPod™

“iPod” is a trademark of Apple Inc., registered in the U.S. and 
other countries.

“Made for iPod” means that an electronic accessory has been 
designed to connect specifically to iPod and has been certified by 
the developer to meet Apple performance standards. 

Apple is not responsible for the operation of this device or its 
compliance with safety and regulatory standards.

DivX, DivX Ultra Certified, and associated logos are trademarks 
of DivX, Inc. and are used under license.

Manufactured under license from Dolby Laboratories. Dolby and 
the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent #’s: 5,451,942; 
5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and 
worldwide patents issued & pending. DTS and DTS 2.0 + Digital 
Out are registered trademarks and the DTS logos and Symbol are 
trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All Rights 
Reserved.

“HDMI”, the “HDMI” logo, and “High-Definition Multimedia 
Interface” are trademarks or registered trademarks of HDMI 
Licensing LLC.

MPEG Layer-3 audio decoding technology licensed from 
Fraunhofer IIS and Thomson multimedia.

Windows Media is either a registered trademark or trademark of 
Microsoft Corporation in the United States and/or other countries.

You can reset the DVD player to its factory defaults.

1

Set the DVD player to standby.

2

While holding down 

 on the DVD player’s 

front panel, press  .

3

Release   when “DVD — NO REQ.” is 
displayed on the front panel display.

4

Press 

/

 repeatedly to select 

“DVD INIT”.

If you change your mind at this point, select “DVD 
— NO REQ.” instead.

5

Press .

The DVD player is reset to its factory defaults and 
goes on standby. Press   again to turn the DVD 
player back on.
The TV Screen, HDMI Resolution, and other settings 
will be set to their factory defaults. The HDMI Audio 
setting will be set to off.

Resetting the DVD player