Yamaha R-840 - Инструкция по эксплуатации - Страница 72

SETTING THE SYSTEM

14

 En

Make sure that you have completed all the necessary 
connections (see “Connecting a TV to the system” on 
page 9).

1

Turn on the TV to which the DVD player is 
connected.

Select the TV input to match the input connected to 
the DVD player.

2

Press   to turn on the receiver.

3

Press DISC.

Set the aspect ratio of the DVD player according to the TV 
you have connected. The format you select must be 
available on the disc. If it is not, the TV display setting 
will not affect the picture during playback.

1

Press SETUP.

The DVD setup menu appears on the screen.

2

Press 

/

/

/

to select “Initial Settings”, 

and then press ENTER.

3

Press 

/

 to select “Video Output”, and then 

press ENTER.

4

Press 

/

 to select “TV Screen”, and then 

press ENTER.

5

Press 

/

 to select one of the options below, 

and then press ENTER.

4:3 (Letter Box)

Select this if you have a conventional TV. In this case, a 
wide picture with black bar on the upper and lower 
portions of the TV screen will be displayed.

4:3 (Pan&Scan)

Select this if you have a conventional TV and want both 
sides of the picture to be trimmed or formatted to fit your 
TV screen.

Note

If the disc does not support an aspect ratio of 4:3 (Pan&Scan), the 
content is displayed in 4:3 (Letter Box).

16:9 (Wide)

Select this if you have a wide-screen TV.

16:9 (Compressed)

Select this if a wide-screen TV is connected to the DVD 
controller with an HDMI cable, and set HDMI Resolution 
to either “1920 x 1080p”, “1920 x 1080i”, or “1280 x 
720p”. When playing back a content whose aspect ratio is 
4:3, black bars cover the sides of the screen.

SETTING THE SYSTEM

Turn on the TV and the system

Setting the TV display

SETUP

,  , , ,

ENTER

Play Mode

Audio Settings

Initial Settings

Disc Navigator

Video Adjust

Video Output

Language

Display

Options

Initial Settings

Digital Audio Out

Digital Out

Dolby Digital Out

DTS Out

96 kHz PCM Out

MPEG Out

On

Dolby Digital

DTS
96kHz > 48kHz

MPEG > PCM

Language

Display

Options

Initial Settings

Digital Audio Out

TV Screen

Component Out

HDMI Resolution

HDMI Color

4:3 (Letter Box)

Interlace

720x480p

Component

Video Output