Yamaha R-840 - Инструкция по эксплуатации - Страница 87

29

 En

Eng

lish

TU
NER 

OPERA

T

IONS

TUNER OPERATIONS

There are 2 tuning methods: automatic and manual. You can also use the automatic and manual preset tuning features to 
store up to 30 stations.

Automatic tuning is effective when station signals are 
strong and there is no interference.

1

Press TUNER to set the receiver to FM mode.

2

Press and hold TUNING 

 for more than 

2 seconds to begin automatic tuning.

When the receiver is tuned into a station, the TUNED 
indicator lights up and the frequency of the received 
station is shown on the front panel display.
• Press 

 to tune into a lower frequency.

• Press 

 to tune into a higher frequency.

If the signal received from the station you want to select is 
weak, tune into it manually.

1

Press TUNER to set the receiver to FM mode.

2

Press TUNING 

 to tune into the desired 

station manually.

Follow the procedure below to preset radio stations 
automatically.

1

Press TUNER to set the receiver to FM mode.

2

Press and hold MEMORY for more than 2 
seconds.

The PRESET indicator starts flashing on the front 
panel display and automatic station preset starts. 
When all frequencies are searched, preset stops 
automatically.
• The search starts at the lowest frequency and goes 

toward the highest frequency.

• The receiver automatically applies a preset number 

to each detected station.

• To cancel the search, press MEMORY.

Notes

• You can preset up to 30 FM stations.
• Any stored station data existing under a preset station number is 

cleared when you store a new station under the same preset 
station number.

FM TUNING

Automatic tuning

Manual tuning

TUNING 

 / 

d

d

d

d

TUNER

 / 

d

d

d

d

d

d

d

d

 / 

d

d

d

d

Automatic preset tuning

PRESET 

u

 / 

d

TUNER

MEMORY