Yamaha R-840 - Инструкция по эксплуатации - Страница 102

44

 En

TROUBLESHOOTING

■

FM

■

iPod

Note

If a transmission error occurs but no status message is displayed on the front panel display of the receiver, check the connection between 
the receiver and your iPod (

☞

p.11).

Problem

Cause

Remedy

See 

page

FM stereo reception is noisy.

The characteristics of FM stereo 
broadcasts may cause this problem 
when the transmitter is too far away or 
the antenna input is poor.

Check the antenna connections.

8

Try using a high-quality directional FM 
antenna.

—

There is distortion, and clear 
reception cannot be obtained 
even with a good FM antenna.

There is multi-path interference.

Adjust the antenna position to eliminate 
multi-path interference.

—

The desired station cannot be 
tuned into with the automatic 
tuning method.

The signal is too weak.

Use a high-quality directional FM antenna.

—

Use the manual tuning method.

29

Previously preset stations can 
no longer be tuned into.

The receiver has been disconnected for 
a long period.

Set preset stations.

29

Status message

Cause

Remedy

See 

page

CONNECT ERR

There is a problem with the signal path 
from your iPod to the receiver.

Turn off the receiver and try resetting your iPod.

11

UNKNOWN TYP

The iPod being used is not supported by 
the receiver.

Only iPod (Click and Wheel), iPod nano, iPod 
Classic, iPod mini and iPod touch are supported.

—

CONNECTED

Your iPod is properly stationed in the 
iPod dock, and the connection between 
your iPod and the receiver is complete.

NOT CONNECT

Your iPod was removed from the iPod 
dock of the receiver.

Station your iPod back to the iPod dock of the 
receiver.

11

CAN'T PLAY

The receiver cannot play back the songs 
currently stored on your iPod.

Check that the songs currently stored on your iPod 
are playable.

—

Store some other playable music files on your iPod.

—