Точки доступа NETGEAR WAC510 Smart Cloud AC1300 6, 2xGE LAN / WAN - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
The descriptions in the table apply to both radios, but you can specify the radio
settings for the 2.4 GHz and 5 GHz radios individually.
Description
Setting
By default, the Turn Radio On check box is selected and the radio broadcasts. Turning
off a radio disables WiFi access for the band, which can be helpful during
configuration, network tuning, or troubleshooting.
Turn Radio On
Select one of the following WiFi modes for the 2.4 GHz radio:
• 11b. 802.11n, 802.11g, and 802.11b WiFi clients can connect to the access point.
However, the speed of 802.11n and 802.11g clients is limited to the maximum
speed that is supported by 802.11b (about 11 Mbps).
• 11bg. 802.11n, 802.11g, and 802.11b WiFi clients can connect to the access point.
However, the speed of 802.11n clients is limited to the maximum speed that is
supported by 802.11g (about 54 Mbps).
• 11ng. 802.11n, 802.11g, and 802.11b WiFi clients can connect to the access point.
This is the default setting.
Select one of the following WiFi modes for the 5 GHz radio:
• 11a. 802.11ac, 802.11na, and 802.11a WiFi clients can connect to the access point.
However, the speed of 802.11ac and 802.11na clients is limited to the maximum
speed that is supported by 802.11a (about 54 Mbps).
• 11na. 802.11ac, 802.11na, and 802.11a WiFi clients can connect to the access
point. However, the speed of 802.11ac clients is limited to the maximum speed
that is supported by 802.11n (generally, ranging from about 300 Mbps to about
450 Mbps).
• 11ac. 802.11ac, 802.11na, and 802.11a WiFi clients can connect to the access
point. This is the default setting.
Wireless Mode
From the menu, select the channel width for the radio. Use the following guidelines:
• A wider channel improves the performance.
• The 802.11n specification allows a 40 MHz–wide channel in addition to the legacy
20 MHz channel that is available with other modes.
• The 802.11ac specification allows an 80 MHz–wide channel in addition to the 20
MHz and 40 MHz channels that are available with other modes.
• The 40 MHz and 80 MHz channels enable higher data rates but leaves fewer
channels available for use.
Channel Width
User Manual
85
Manage the Basic WiFi and
Radio Features
Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
