Точки доступа NETGEAR WAC510 Smart Cloud AC1300 6, 2xGE LAN / WAN - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Power LED is off
If you use a Power over Ethernet (PoE) connection and the Power LED and other LEDs
are off when the Ethernet cables are connected, do the following:
•
Make sure that the Ethernet cable between the access point and the PoE switch is
correctly connected at both ends.
•
Make sure that the other end of the Ethernet cable is plugged into a PoE port (not
a non-PoE port) on a PoE switch (not a non-PoE switch) that is receiving power.
•
Make sure that the PoE power budget of the PoE switch is not oversubscribed and
that the PoE switch is capable of delivering PoE power to the access point.
If you use a power adapter and the Power LED and other LEDs are off when the access
point is turned on, do the following:
•
Make sure that the power adapter is correctly connected to the access point and
that the power adapter is correctly connected to a functioning power outlet. If it is
in a power strip, make sure that the power strip is turned on. If it is plugged directly
into the wall, verify that the outlet is not switched off.
•
Make sure that you are using the NETGEAR 12V, 2.5A power adapter for this product.
If the error persists, a hardware problem might exist. For recovery instructions or help
with a hardware problem, contact technical support at netgear.com/support.
Power LED remains solid amber
When you turn on the power to the access point, the Power LED lights solid amber
temporarily and then turns solid green, indicating that the startup procedure is complete
and the access point is ready.
If the Power LED remains solid amber and does not turn solid green, a failure occurred
or the access point is malfunctioning.
If the Power LED does not turn solid green, do the following:
1. Turn the power off and back on and wait several minutes to see if the access point
recovers.
2. If the access point does not recover, you can use the Reset button to return the
access point to its factory default settings. For more information, see Use the Reset
button to reset the access point on page 196.
If the error persists, a hardware problem might exist. For recovery instructions or help
with a hardware problem, contact technical support at netgear.com/support.
User Manual
233
Diagnostics and
Troubleshooting
Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
