Точки доступа NETGEAR WAC510 Smart Cloud AC1300 6, 2xGE LAN / WAN - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Manually download firmware and upgrade the access point
Downloading firmware to a local computer and upgrading the access point are two
separate tasks that are combined in the following procedure. After you upgrade the
access point to new firmware, the old firmware is saved as backup firmware so that you
can revert to it (see Revert to the backup firmware on page 188).
IMPORTANT: When you install an older firmware version (or the backup firmware
version), that is, you downgrade rather than upgrade the firmware, the configuration
of the access point is reset (cleared) with the exception of the IP address, access point
name, and password for the local browser interface. The access point restarts and
broadcasts SSID Netgearxxxxxx, in which xxxxxx represents the last six hexadecimal
digits of the access point’s MAC address. The MAC address is listed on the product
label. The default WiFi passphrase is sharedsecret.
To download firmware manually and upgrade your access point:
1. Visit netgear.com/support/download/, locate the support page for your product,
and download the new firmware.
2. Read the new firmware release notes to determine whether you must reconfigure
the access point after upgrading.
3. Launch a web browser from a computer that is connected to the same network as
the access point or directly to the access point through an Ethernet cable or WiFi
connection.
4. Enter the IP address that is assigned to the access point.
A login window opens.
If your browser does not display the login window but displays a security warning,
dismiss the warning. For more information, see Dismiss a browser security warning
on page 45.
5. Enter the access point user name and password.
The user name is admin. The password is the one that you specified. The user name
and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight app or Insight Cloud portal, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight App on page 27).
The Dashboard page displays.
6. Select Management > Maintenance > Upgrade > Firmware Upgrade.
The Firmware Upgrade page displays.
User Manual
187
Manage and Maintain the Access
Point
Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
