Точки доступа NETGEAR WAC510 Smart Cloud AC1300 6, 2xGE LAN / WAN - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
By default, this check box is selected, allowing an admin user to access the local
browser UI over the WiFi network.
Note: If the management VLAN and WiFi network VLAN are identical (which they
are by default), an admin user can always access the local browser UI over a wired
network connection, even if you disable access over the WiFi network.
9. If the Allow access to devices listed below check box displays: To add network
devices that are exempt from isolation so that clients are allowed to reach them, do
the following:
a. Select the Allow access to devices listed below check box.
By default, the check box is cleared.
The Allowlist displays.
b. In the field to the right, enter up to five static IP addresses and domain names of
devices that clients are allowed to reach over the WiFi network.
For example, you could enter the static IP address or domain name of a network
printer that you want to make available to WiFi clients. A domain name on the
Allowlist must resolve to a static IP address.
c. Click the Move button.
The addresses and domain names are added to the Allowlist.
d. To remove one, several, or all addresses and domain names, select individual
check boxes or the Select All check box, and click the Remove button.
10. Click the Apply button.
Your settings are saved.
Hide or broadcast the SSID for a WiFi network
By default, a WiFi network (SSID or VAP) broadcasts its network name (also referred to
as the SSID) so that WiFi clients can detect the SSID in their scanned network lists. For
additional security, you can turn off the SSID broadcast and hide the SSID so that users
must know the SSID to be able to join the WiFi network.
Note: If you set up a wireless distribution system (WDS; see Set up a WiFi bridge
between access points on page 117), you must keep the SSID broadcast enabled.
To hide or broadcast the network name for a WiFi network:
1. Launch a web browser from a computer that is connected to the same network as
the access point or directly to the access point through an Ethernet cable or WiFi
connection.
2. Enter the IP address that is assigned to the access point.
User Manual
61
Manage the Basic WiFi and
Radio Features
Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
