Moulinex Simply Cook MK622832 - Инструкция по эксплуатации - Страница 63

119

118

EN

Malfunction 

description

Causes

Solutions

Rice 

undercooked or 

overcooked.

Too much or not 

enough water compared 

to rice quantity.

Refer to rice cooking table 

for water quantity. 

Always add rice to the 

cooking bowl first, then 

add water to the water 

level mark on the inside of 

the bowl.

Rice 

undercooked or 

overcooked.

Insufficiently simmered.

Send to the authorized 

service center for repair.

Automatic keep 

warm function 

fails

(appliance stays on 

cooking programe 

or does not heat on 

keep warm)

.

The keep warm function 

has been cancelled by 

user during the setting. 

The function may only 

operate after Porridge, 

Soup, Stew, Rice/

cereals menus.

E0

The sensor on the top 

open circuit or short 

circuit.

E1

The sensor on the 

bottom open or short 

circuit.

Stop the appliance and 

restart the program. If the 

problem repeats, please 

send to the authorized 

service center for repair.

Remark: If inner bowl is deformed, do not use it anymore and get a 

replacement from the authorized service center for repair.

•  The surface of the bowl may change color after first use or with prolonged 

use. This color change is the effect of steam and water—it will not affect 
the use of the multicooker and is not hazardous to your health. You can 
continue to use it safely.

Cleaning the inner lid 

Remove the inner lid by pushing outwards with both hands (fig.3). Clean it 
with a sponge and washing up liquid (fig.4). Then wipe dry and put it back 
behind the 2 ribs and push it on the top until it’s fixed – 

(fig.7–8)

. 

Cleaning and care of the other parts of the appliance 

Clean the outside of the multicooker – 

fig.6

, the inside of the lid and the 

cord with a damp cloth and wipe dry. Do not use abrasive products. 
Do not use water to clean the interior of the appliance body as it could 
damage the heat sensor.

TECHNICAL TROUBLESHOOTING GUIDE

Malfunction 

description

Causes

Solutions

Control panel 

lights off and 

no heating.

Appliance not  

plugged in.

Check the appliance is 

plugged in the socket, and 

is switched on.

Control panel 

lights off and 

heating.

Problem of the 

connection of the 

indicator light or 

indicator light is 

damaged.

Send to authorized service 

center for repair.

Steam leakage 

during use.

Lid is badly closed.

Open and close the lid 

again.

Inner lid not positioned 

or assembled properly.

Ensure the inner lid is well 

positioned – 

fig.7-8

The sealing gasket is 

damaged.

Send to authorized service 

center for repair.