Коммутаторы D-Link DGS-1210-28/FL 24xGE, 2xSFP, L2 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
DGS-1210 Series Ethernet Managed Switch CLI Reference Guide
273
no response comes from the server host, the Switch sends an
authentication request to the second
tacacs
host in the server group
and so on, until the list is exhausted. When the local method is used,
the privilege level is dependant on the local account privilege
configured on the Switch.
Successful login using any of these methods gives the user a ‘user’
priviledge only. If the user wishes to upgrade his or her status to the
administrator level, the user must implement the
enable admin
command, followed by a previously configured password. (
See the
enable admin
part of this section for more detailed information,
concerning the
enable admin
command.)
Parameters
default
– The default method list for access authentication, as
defined by the user. The user may choose one or more of the
following authentication methods:
tacacs+
– Specifies that the user is to be authenticated
using the
TACACS+
protocol from the remote TACACS+
server hosts
of the TACACS+
server group
list.
radius
- Specifies that the user is to be authenticated using
the
RADIUS
protocol from the remote RADIUS
server hosts
of the RADIUS
server group
list.
local -
Specifies that the user is to be authenticated using
the local
user account
database on the Switch.
server_group <string 15>
–Specifies that the user is to be
authenticated using the server group
account
database on
the Switch.
none
– Specifies that no authentication is required to
access the Switch.
method_list_name <string 15>
– Specifies a previously created
method list name defined by the user. One or more of the following
authentication methods may be added to this method list:
tacacs+
– Specifies that the user is to be authenticated
using the
TACACS+
protocol from a remote TACACS+
server.
radius
- Specifies that the user is to be authenticated using
the
RADIUS
protocol from a remote RADIUS server.
local
- Specifies that the user is to be authenticated using
the local
user account
database on the Switch.
server_group <string 15>
–Specifies that the user is to be
authenticated using the server group
account
database on
the Switch.
none
– Specifies that no authentication is required to
access the Switch.
Restrictions
Only Administrator-level users can issue this command.
Example usage:
To configure the user defined method list ‘Trinity’ with authentication methods TACACS+, RADIUS and
local, in that order.
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
