D-Link DGS-1210-28/FL 24xGE, 2xSFP, L2 - Инструкция по эксплуатации - Страница 173

Коммутаторы D-Link DGS-1210-28/FL 24xGE, 2xSFP, L2 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 397
Загружаем инструкцию
background image

DGS-1210 Series Ethernet Managed Switch CLI Reference Guide 

158 

is 1. The value ranges between 1 and 65535. 

 

primary  – 

To specify the route as the primary route to the 

destination. 

 

backup  –

  To specify the route as the backup route to the 

destination. If the route is not specified as the primary route or 

the backup route, then it will be auto-assigned by the system. 

The first created is the primary, the second created is the 

backup. 

Restrictions 

Only administrator, operator or power user-level users can issue this 

command. 

Example usage: 

To add a default route with a nexthop of 10.90.58.33 as primary route: 

DGS-1210-28MP:5# create iproute default 10.90.58.33 primary 
Command: create iproute default 10.90.58.33 primary 
 
Success. 
DGS-1210-28MP:5# 

 

delete iproute 

Purpose 

Used to delete an IP route entry from the Switch’s IP routing table.  

Syntax 

delete iproute 

[<network_address> | default] <ipaddr> 

Description 

The 

delete iproute

  command will delete an existing IP route entry 

from the Switch’s IP routing table.  

Parameters 

<network_address>  -  The IP address and netmask of the IP 

interface that is the destination of the route. Specify the address and 

mask information using the traditional format (for example, 

10.90.90.3/255.0.0.0 or in CIDR format, 10.90.90.3/8). 
default – Specifies to delete a default IP route entry. 
<ipaddr> – To specify the IPv4 address for the next hop router to be 

configured. 

Restrictions 

Only Administrator, operator and power user-level users can issue 

this command. 

Example usage: 

To delete the default route from the routing table: 

DGS-1210-28MP:5# delete iproute 10.90.58.33 
Command: delete iproute 10.90.58.33 
 
 
Success. 
DGS-1210-28MP:5# 

 

show iproute 

Purpose 

Used to display the Switch’s current IP routing table.  

Syntax 

show iproute {static}

 

Description 

The 

show iproute

  command will display the Switch’s current IP 

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к D-Link DGS-1210-28/FL 24xGE, 2xSFP, L2?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"