Ryobi RBGL650G - Инструкция по эксплуатации - Страница 5

English

3

EN

FR

DE

ES

IT

NL

PT

DA

SV

FI

NO

RU

PL

CS

HU

RO

LV

LT

ET

HR

SL

SK

EL

TR

UK

Information available on the grinding wheel label

The information on the wheel label is important. Read and 
check it carefully to ensure you are selecting the correct 
type of wheel.
1.  Manufacturer, supplier, importer or trade mark.
2.  Nominal dimensions of grinding wheel, in particular the 

diameter of the bore.

3.  Abrasive type, grain size, grade or hardness, type of 

bond and use of reinforcement.

4.  Maximum operation speed in metres per second.
5.  Maximum permissible speed of rotation in 1/min .
6.  For declaration of conformity, the abrasive products 

shall be marked with EN 12413.

7.  Restriction of use and safety warning symbols.
8. Traceability code, eg. A production/batch number, 

expiry date or series number.

RESIDUAL RISKS

Even when the product is used as prescribed, it is still 
impossible to completely eliminate certain residual risk 
factors. The following hazards may arise in use and the 
operator should pay special attention to avoid the following:

Ŷ

Risk of contact with unguarded parts of the rotating 
wheel.

Ŷ

Burn hazard from contact with hot wheel or work piece.

Ŷ

Damage to respiratory system if effective dust mask is 
not worn.

Ŷ

Damage to hearing if effective hearing protection is not 
worn.

KNOW YOUR PRODUCT

See page 107.

1. Spark shield
2. Spark arrestor
3. Wheel guard
4.  Wheel dressing tool
5. Work rest
6. Work lamp
7.  Sanding belt adjustment knob
8. Sanding belt
9. Work rest
10. Work rest lock knob
11. Water tray
12. On/off switch
13. Mounting hole
14. Sanding belt guard
15. Sander guard

MAINTENANCE

Ŷ

Do not modify the product in any way or use accessories 
not approved by the manufacturer. Your safety and that 
of others may be compromised.

Ŷ

Do not use the product if any switches, guards or 
other functions does not work as intended. Return to 
an authorised service centre for professional repair or 
adjustment.

Ŷ

Do not make any adjustments whilst the product is 
running.

Ŷ

Always make sure the power plug has been 
removed from the mains power source before 
making adjustments, lubricating or when doing any 
maintenance on the product.

Ŷ

Before and after each use, check the product for 
damage or broken parts. Keep the product in top 
working condition by immediately replacing parts with 
spares approved by the manufacturer.

Ŷ

Clean out accumulated dust using a brush or vacuum 
cleaner. Do not use compressed air.

Ŷ

To assure safety and reliability, all repairs, including 
changing brushes, should be performed by an 
authorised service centre.

Ŷ

If the power supply cord is damaged, it must be 
replaced only by the manufacturer or by an authorised 
service centre to prevent damage to the grinder sander 
or risk of electrocution.

 WARNING

For greater safety and reliability, all repairs should be 
performed by an Authorised Ryobi Service Centre.

TRANSPORTATION AND STORAGE

Ŷ

When storing the product, disconnect the power 
cord. Store the product in a secure place that is not 
accessible to children.

Ŷ

Clean the product using a brush and vacuum cleaner 
before storage.

ENVIRONMENTAL PROTECTION

Recycle raw materials instead of disposing 
of as waste. The machine, accessories 
and packaging should be sorted for 
environmental-friendly recycling.

SYMBOLS ON THE PRODUCT

Safety alert

CE conformity

Please read the instructions carefully before 
starting the machine.