JVC GR-PD1 - Инструкция по эксплуатации - Страница 79

EN

79

USER MAINTENANCE

1

Turn off the camcorder.

2

Loosen the grip strap.

3

Slide and hold 

OPEN/EJECT

 in the direction of 

the arrow, then pull the cassette holder cover 
open until it locks. The cassette holder opens 
automatically. Remove the cassette.

4

Press “PUSH HERE” to close the cassette holder.

●

Once the cassette holder is closed, it recedes 
automatically. Wait until it recedes completely 
before closing the cassette holder cover.

5

Slide 

BATT.RELEASE

1

 and remove the battery 

pack 

2

3

. 

1

To clean the exterior, wipe gently with a soft 
cloth.
Put the cloth in diluted mild soap and wring it 
well to wipe off heavy dirt. Then wipe again with 
a dry cloth.

2

Press 

PUSH OPEN

 and open the LCD monitor. 

Wipe gently with a soft cloth. Be careful not to 
damage the monitor. Close the LCD monitor.

3

To clean the lens, blow it with a blower brush, 
then wipe gently with lens cleaning paper.

4

To clean the viewfinder, raise the viewfinder to 
the vertical position.

5

Open the viewfinder cleaning hatch in the 
direction of the arrow 

A

.

Insert a lens blower or soft cloth into the gap at 
the bottom of the viewfinder and clean the 
interior of the viewfinder with it 

B

.

6

Close the hatch. Tilt the viewfinder back to the 
horizontal position and push it back in. 

NOTES:

●

Avoid using strong cleaning agents such as 
benzine or alcohol.

●

Cleaning should be done only after the battery 
pack has been removed or other power units have 
been disconnected.

●

Mould may form if the lens is left dirty.

●

When using a cleaner or chemically treated cloth 
refer to the cautions of each product.

After Use

BATT.RELEASE Switch

Remove.

Cassette holder

cover

Cassette holder 

PUSH HERE

OPEN/EJECT Switch

Cleaning The Camcorder

Hatch

Lens blower

RE

FERENCES