Видеокамеры JVC GR-PD1 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
EN
51
To add thumbnail images during video
playback
1
Perform steps
1
to
4
using thumbnail images (NAVIGATION Search)”.
2
Press
4
·
9
to start video playback.
3
Press
NAVI STORE
at the desired point.
●
The “
” indicator appears briefly and the
image of the point where
NAVI STORE
is
pressed is stored in the memory card as a
thumbnail image.
●
If you use the tape recorded in PS50 or HI-RES
mode, it will enter the playback pause mode.
To play, press
4
·
9
.
To delete thumbnail images
1
Load a memory card. (
2
Set the Playback Mode switch to “VIDEO”.
3
Set the Power Switch to “
P
” while pressing
down the Lock Button located on the switch.
4
Press the
MENU
Wheel in. The Menu Screen
appears.
5
Rotate the
MENU
Wheel to select “
t
VIDEO”,
and press it. The VIDEO Menu appears.
6
Rotate the
MENU
Wheel to
select “NAVI.DEL.”, and
press it. The Sub Menu
appears.
7
By rotating the
MENU
Wheel...
Select “IMAGE SEL.” to delete the currently
displayed thumbnail image.
Select “TAPE SEL.” to delete all thumbnail images
for the tape which contains the currently
displayed image.
Select “ALL” to delete all thumbnail images
stored in the memory card at once.
8
Press the
MENU
Wheel in.
The NAVIGATION screen
appears.
9
Rotate the
MENU
Wheel to
select “EXECUTE”, and
press it.
●
Press
3
to display the previous page. Press
5
to display the next page.
●
To cancel deletion, select “RETURN”.
●
Thumbnail images cannot be deleted during
video playback.
CAUTION:
Do not remove the memory card or perform any
other operation (such as turning off the camcorder)
during deletion. Also, be sure to use the provided
AC Power Adapter/Charger, as the memory card may
be corrupted if the battery becomes exhausted
during deletion. If the memory card becomes
corrupted, initialise it.
NOTE:
Once images are deleted, they cannot be restored.
Check images before deleting.
IMPORTANT:
●
Be sure to always use the same tape and memory
card together as they were during recording;
otherwise, the camcorder cannot recognise Tape
and Memory Card IDs to perform NAVIGATION
function properly.
●
Check if an appropriate tape and memory card are
loaded when the following messages appear: “NO
ID ON TAPE OR CARD”, “UNABLE TO USE
NAVIGATION”, “THIS MEMORY CARD IS NOT
COMPATIBLE”.
●
If you change the memory card while shooting on
one tape, two memory cards will share the tape’s
thumbnail images. We recommend that you use
one memory card for one tape.
●
NAVIGATION Search does not work if the current
position is at a blank portion on the tape. Also, do
not leave a blank portion partway through the tape
when shooting; otherwise, NAVIGATION function
does not work properly.
●
Before shooting newly over a recorded tape, be
sure to delete all thumbnail images of the previous
recording from the relevant memory card.
●
If you copy thumbnail images from one memory
card to another via a PC, NAVIGATION Search
does not work with the copied memory card.
I D
O
V
E
S T
–
E
R
E
O
OF
.
–
ARR
DV N
F
± 0
N
–
HRO
S Y C
0
.
E
C
–
MOD
RE
OF
CO
Y
P
F
–
OF
PU
A
I N
S / V
T
F
–
N
RE T UR
D
U D M
SO N
E
O
L .
V . DE
NA I
I G
N
A
NAV
T I O
E T E
DE L
CURREN T ?
E X ECU T E
RE T URN
1
.
6
2
5
1
:
2
0
. 0
0
3
