Видеокамеры JVC GR-PD1 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
6
EN
How To Attach The Core Filter
Attach the core filters to the cables. The core filter
reduces interference.
Types of core filters
*
Optional
(If you have an optional JVC i.LINK cable
VC-VDV206U or VC-VDV204U with core
filters, it is not necessary to attach the provided
core filter. If you are going to use any other
i.LINK cable, attach the provided core filter.)
** Attach two core filters to both ends of the cable.
The procedure below is an example of winding
cable once.
1
Release the stoppers on both ends of the core
filter.
2
Run the cable through the core filter, leaving
approx. 3 cm of cable between the cable plug
and the core filter. Wind the cable once around
the outside of the core filter as shown in the
illustration.
●
Wind the cable so that it is not slack.
3
Close the core filter until it clicks shut.
NOTES:
●
Take care not to damage the cable.
●
When connecting a cable, attach the end with the
core filter to the camcorder.
How To Attach The Strap
1
Following the illustration, thread the strap
through the eyelet
a
.
2
Fold it back and thread it through the buckle
b
.
3
Repeat the procedure to attach the other end of
the strap to the other eyelet
c
.
4
Confirm the strap is not twisted.
Size
Cable
Times to
wind
Large
i.LINK cable*
Twice
Medium
USB cable**
Once
Small
DC cord
Audio cable
Once
Stopper
3 cm
Wind once.
