Видеокамеры JVC GR-PD1 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
EN
49
TWILIGHT
: Makes evening scenes look more
natural. White Balance (
pg. 46) is automatically
set to “
”, but can be changed to your desired
setting. When Twilight is chosen, the camcorder
automatically adjusts the focus from approx. 10 m
to infinity. From less than 10 m, adjust the focus
manually.
1
Set the Recording Mode Switch to “HI-RES”,
“PS50” or “DV”.
●
Some modes of Program AE cannot be used
with the Switch set to “MEMORY”.
2
Set the Power Switch to “
M
” while pressing down
the Lock Button located on the switch.
3
Open the LCD monitor fully, or pull out the
viewfinder fully.
4
Press
P.AE
. The PROGRAM AE screen appears.
5
Rotate the
MENU
Wheel to select the desired
mode, and press it.
6
Press the
MENU
Wheel in to activate the selected
effect.
●
The selected effect indicator appears.
To deactivate the selected effect…
Select “OFF” in step
5
. Or, set the Power Switch to
“
A
”.
NOTE:
Program AE can be changed during recording or
during Record-Standby.
IMPORTANT:
Some modes of Program AE cannot be used with
certain Wipe/Fader effects. If an unusable mode is
selected, the indicator of Wipe/Fader effects blinks
or goes out.
Using the following 4 Effect Modes allows you to
provide special effects for your shooting.
SEPIA
: Recorded scenes have a brownish tint
like old photos. Using this effect with “DV WIDE”
set to ”SQUEEZE” (
pg. 36) provides “classic film”
effect.
MONOTONE
: Like classic black and white
films, your footage is shot in B/W. Using this effect
with “DV WIDE” set to ”SQUEEZE” (
provides “classic film” effect.
CLASSIC FILM
: Gives recorded scenes a
strobe effect.
STROBE
: Your recording looks like a series of
consecutive snapshots.
NOTES:
●
When the Recording Mode Switch is set to “HI-
RES” or “MEMORY”, “MONOTONE” is only
available.
●
“SEPIA”, “CLASSIC FILM” and ”STROBE” are not
activated when the recording mode is set to “HI-
RES”.
1
Set the Recording Mode Switch to “PS50” or
“DV”.
●
Some modes of Special Effects cannot be used
in “HI-RES” or “MEMORY” mode.
2
Set the Power Switch to “
M
” while pressing down
the Lock Button located on the Switch.
3
Open the LCD monitor fully, or pull out the
viewfinder fully.
4
Press
EFFECT
. The EFFECT screen appears.
5
Rotate the
MENU
Wheel to select the desired
mode, and press it.
6
Press the
MENU
Wheel in to activate the selected
effect.
●
The selected effect indicator appears.
To deactivate the selected effect...
Select “OFF” in step
5
. Or, set the Power Switch to
“
A
”.
IMPORTANT:
Some modes of Special Effects cannot be used with
certain Wipe/Fader effects. If an unusable mode is
selected, the indicator of Wipe/Fader effects blinks.
Special Effects
