с леской Ryobi RLT5027-PK3 5133002182 - Инструкция по эксплуатации - Страница 4

2

| English

Ŷ

Keep proper footing and balance at all times.

Ŷ

Do not walk backwards when using the product.

Ŷ

Walk, never run.

Ŷ

Keep bystanders, children and pets 15m away from the 
area of operation, stop the product if anyone enters the 
area.

Ŷ

Keep the cutting attachment below waist level.

Ŷ

Never operate the product with damaged guards or 
without guards in place.

Ŷ

Never fit a metal replacement line.

Ŷ

Keep hands and feet away from the cutting means at 
all times and especially when switching on the motor.

Ŷ

Beware, the cutting elements continue to rotate after 
the motor is switched off.

Ŷ

Beware of objects thrown by the cutting means. Clear 
debris like small stones, gravel and other foreign 
objects from the work area before starting operation. 
Wires or string may become entangled with the cutting 
means.

Ŷ

Switch off and disconnect from the power supply before:

Ɣ

servicing

Ɣ

leaving the product unattended

Ɣ

cleaning your product or clearing a blockage

Ɣ

changing accessories

Ɣ

checking for any damage after hitting an object 

Ɣ

checking for any damage if the product starts to 
vibrate abnormally

Ɣ

performing maintenance

Ŷ

The small blade fitted to the lawn guard is designed to 
trim the new extended line to the correct length for safe 
and optimum performance. It is very sharp, do not touch 
it particularly when cleaning the tool.

Ŷ

Always ensure that ventilation openings are kept clear 
of debris.

Ŷ

Make sure the cutting head attachment is properly 
installed and securely fastened.

Ŷ

Make sure all guards, deflectors and handles are 
properly and securely attached.

Ŷ

Do not modify the machine in any way, this may 
increase the risk of injury to yourself or others.

Ŷ

Use only the manufacturer’s replacement cutting line. 
Do not use any other cutting attachment.

TRANSPORTATION AND STORAGE

Ŷ

Stop the machine and allow it to cool before storing or 
transporting.

Ŷ

Clean all foreign material from the product. Store it in a 
cool dry and well-ventilated place that is inaccessible 
to children. Keep away from corrosive agents such 
as garden chemicals and de-icing salts. Do not store 
outdoors.

Ŷ

For storage, always disconnect from power supply and 
wind cable.

Ŷ

For transportation, secure the machine against 
movement or falling to prevent injury to persons or 
damage to the machine.

MAINTENANCE

 WARNING

Use only original manufacturer’s replacement parts, 
accessories and attachments. Failure to do so can 
cause possible injury, poor performance and may void 
your warranty.

 WARNING

Servicing requires extreme care and knowledge 

DQG VKRXOG EH SHUIRUPHG RQO\ EH D TXDOL¿HG VHUYLFH

technician. For service we suggest you return the 
product to your nearest authorized service center for 
repair. When servicing, use only identical replacement 
parts.

Ŷ

Switch off and disconnect from the mains before: 
conducting any maintenance or cleaning work.

Ŷ

<RX PD\ PDNH DGMXVWPHQWV DQG UHSDLUV GHVFULEHG

here. For other repairs, contact the authorized service 
agent.

Ŷ

For replacement line use only nylon filament line of 
the diameter described in the specification table of this 
manual

Ŷ

After extending new cutter line, always return the 
product to its normal operating position before starting.

Ŷ

After each use, clean the product with a soft dry cloth. 
Any part that is damaged should be properly repaired or 
replaced by an authorized service centre.

Ŷ

Check all nuts, bolts and screws at frequent intervals 
for proper tightness to ensure the product is in safe 
working condition.

INTENDED USE

The product is only intended for use outdoors.
The product is designed for cutting grass, light weeds 
and other similar vegetation at or about ground level. 
The cutting plane should be approximately parallel to the 
ground surface when trimming and approximately vertical 
when edging.
The product should not be used to cut or trim hedges, 
bushes or other vegetation where the cutting plane is not at 
or about ground surface level.

RESIDUAL RISKS

Even when the product is used as prescribed, it is still 
impossible to completely eliminate certain residual risk 
factors. The following hazards may arise in use and the 
operator should pay special attention to avoid the following: 

Ŷ

Injury caused by vibration. Hold the tool by designated 
handles and restrict working time and exposure.

Ŷ

Exposure to noise can cause hearing injury. Wear ear 
protection and limit exposure.