Триммеры Hitachi CG25EUS - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
6
English
MEANINGS
OF
SYMBOLS
NOTE:
Some units do not carr y them.
Symbols
WARNING
The following show symbols used for the machine. Be sure that you understand their meaning before use.
It is impor tant that you read, fully
understand and obser ve the following
safety precautions and warnings.
Careless or improper use of the unit may
cause serious or fatal injur y.
Shows maximum shaft speed. Do not
use the cutting attachment whose
max rpm is below the shaft rpm.
Read, understand and follow all warnings
and instructions in this manual and on
the unit.
Gloves should be worn when
necessar y, e.g., when assembling
cutting equipment.
Always wear eye, head and ear protectors
when using this unit.
Use anti-slip and sturdy footwear.
Do not use metal/rigid blades when this
sign is shown on the unit.
Blade thrust may occur when the
spinning blade contacts a solid object
in the critical area. A dangerous
reaction may occur causing the
entire unit and operator to be thrust
violently. This reaction is called blade
thrust. As a result, the operator may
lose control of the unit which may
cause serious or fatal injur y. Blade
thrust is more likely to occur in areas
where it is di
ffi
cult to see the material
to be cut.
Keep all children, bystanders and helpers
15 m away from the unit. If anyone
approaches you, stop the engine and
cutting attachment immediately.
Be careful of thrown objects.
Indicate handle location. Do not
attach handle above this point.
Before
using
your
machine
• Read the manual carefully.
• Check that the cutting equipment is correctly assembled and adjusted.
• Star t the unit and check the carburetor adjustment. See “MAINTENANCE”.
Contents
WHAT IS WHAT .................................................................................7
WARNINGS AND SAFET Y INSTRUCTIONS ...................................8
SPECIFICATIONS .............................................................................9
ASSEMBLY PROCEDURES ..............................................................9
OPERATING PROCEDURES .......................................................... 10
MAINTENANCE ............................................................................... 11
(Original instractions)
000Book̲CG25EUS̲EE.indb 6
000Book̲CG25EUS̲EE.indb 6
2009/12/26 9:26:18
2009/12/26 9:26:18
