Siemens TK 76K573 - Инструкция по эксплуатации - Страница 49

47

de

en

Important:

 The selected amount 

in ml is an 

approximate value

 and 

can vary significantly as a result of 

crema forming, the grind setting or 

the type of milk used, etc�

Adjusting the grinding unit 

The rotary selector (16) on the top of the 

appliance adjusts the degree of grinding 

from coarse to fine as required.

16

Warning:

Adjust the grinding unit only 

while it is running� Otherwise the 

 appliance may be damaged�

1�  Deploy the appliance fully  

(see “Deployment system”)�

2�  In the drink selection menu, select 

Espresso

�

3�  Press 

start stop

 (8)�

4�  While the grinding unit is running, adjust 

the rotary selector (16) from fine 

 to 

coarse   or back as required�

  The new setting will not become 

apparent until after the second 

cup of coffee�

  For dark roast coffee beans, 

choose a finer grind, for lighter 

beans a coarser grind�

Checking the water hardness

The water hardness setting can be adjusted 

on this appliance� It is important to set the 

water hardness correctly, so that the appli-

ance indicates accurately when the descal-

ing programme should be run� The factory 

setting for the water hardness is 4� 

You can check the water hardness using 

the enclosed test strip or by asking your 

local water supplier. Dip the test strip briefly 

in water, gently shake off any drips, and 

check the result after one minute�

Water hardness levels and settings:
Level Water hardness

German (°dH) French (°fH)

1

2

3

4

1-7

8-14

15-21

22-30

1-13

14-25

26-38

39-54

Tips on energy saving

►

After approx� 30 minutes (factory 

setting), the appliance will switch off 

automatically and will not require any 

more energy� 

►

The default time can be shortened 

(see “Auto off after” under “Displaying 

settings”)�

►

If the appliance is not in use, switch it 

off with the 

on off

 button�

►

If possible, do not interrupt coffee 

or milk froth dispensing� Stopping a 

process prematurely results in higher 

energy consumption and the drip tray 

fills up more quickly.

►

Always descale the appliance when 

Service - descale

 is displayed (see 

“Descaling”) to avoid a build-up of 

limescale� Limescale residue results in 

higher energy consumption�