Siemens TK 76K573 - Инструкция по эксплуатации - Страница 45

43

de

en

Immediately after that the coffee is brewed 

and then runs into the cup or glass�

  In the case of the strength settings 

2x

*

 (AromaDouble Shot), the 

appliance brews twice in succes-

sion� Wait until the procedure is 

fully completed�

  Dried milk residue is difficult to 

remove, so clean the milk system 

immediately after use (see  

“Cleaning the milk system”)�

Two cups at once 

1�  Place two cups under the two coffee 

outlets left and right: 

2�  Select 

Espresso

 or 

Coffee

 with the 

rotary knob   (4)� Press 

>

 (3) and 

turn the rotary knob   (4) to set the 

required strength�

3�  Press 

>

 (3) to switch to the per-cup 

quantity selection� In the per-cup quan-

tity selection, keep turning the rotary 

knob   (4) to the right until the display 

shows 

2 x

 in front of the cup symbol: 

*

2x 

+

Coffee

4�  Set the required quantity for the two 

cups by turning the rotary knob   (4) 

(small, medium, large)�

5�  Press 

start stop

 (8)� 

Coffee is dispensed into the two cups�

  The appliance brews twice in  

succession; wait for the complete 

process to finish.

My coffee 

The 

My coffee

 setting allows you to define 

the exact mix of coffee and frothed milk that 

suits your own individual taste�

1�  Connect the milk tube to the milk frother 

(see “Preparation using milk”)� 

2�  Place container with milk on the grate� 

Introduce the milk tube into the contain-

er� The notched end of the tube should 

be fully immersed in the milk: 

3�  Place a cup under the coffee outlet

(9)�

4�  Select 

My coffee

 with the rotary knob 

 (4)� 

1x 

*

My coffee

5�  Press 

>

 (3) to switch to the coffee 

strength selection� Set the required 

strength with the rotary knob   (4)� 

1x 

*

My coffee

6�  Press 

>

 (3) to go on to the per-cup 

quantity selection� Set the required per-

cup quantity with the rotary knob   (4): 

1x 

*

+