Bosch PCM 7 S - Инструкция по эксплуатации - Страница 27

 English | 

27

Bosch Power Tools

1 609 929 W43 | (22/7/10)

g) If devices are provided for the connec-

tion of dust extraction and collection fa-
cilities, ensure these are connected and 
properly used. 

Use of dust collection can 

reduce dust-related hazards.

4) Power tool use and care

a) Do not force the power tool. Use the cor-

rect power tool for your application. 

The 

correct power tool will do the job better 
and safer at the rate for which it was de-
signed.

b) Do not use the power tool if the switch 

does not turn it on and off. 

Any power 

tool that cannot be controlled with the 
switch is dangerous and must be re-
paired.

c) Disconnect the plug from the power 

source and/or the battery pack from the 
power tool before making any adjust-
ments, changing accessories, or storing 
power tools. 

Such preventive safety 

measures reduce the risk of starting the 
power tool accidentally.

d) Store idle power tools out of the reach of 

children and do not allow persons unfa-
miliar with the power tool or these in-
structions to operate the power tool. 

Power tools are dangerous in the hands of 
untrained users.

e) Maintain power tools. Check for mis-

alignment or binding of moving parts, 
breakage of parts and any other condi-
tion that may affect the power tool’s op-
eration. If damaged, have the power tool 
repaired before use. 

Many accidents are 

caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean. 

Prop-

erly maintained cutting tools with sharp 
cutting edges are less likely to bind and 
are easier to control.

g) Use the power tool, accessories and tool 

bits etc. in accordance with these in-
structions, taking into account the work-
ing conditions and the work to be per-
formed. 

Use of the power tool for 

operations different from those intended 
could result in a hazardous situation.

5) Service

a) Have your power tool serviced by a qua-

lified repair person using only identical 
replacement parts. 

This will ensure that 

the safety of the power tool is maintained.

Safety Warnings for Sliding Mitre Saws

f

The machine is delivered with a warning la-
bel in German language (marked with the 
number 2 in the representation of the ma-
chine on the graphic page).
Before putting into operation for the first 
time, attach the supplied sticker in your na-
tional language over the German warning la-
bel.

f

Never make warning signs on the machine 
unrecognisable. 

f

Never stand on the power tool. 

Serious inju-

ries can occur when the power tool tips over 
or when inadvertently coming into contact 
with the saw blade.

f

Make sure that the guard operates properly 
and that it can move freely. 

Never lock the 

guard in place when opened.

f

Never remove cutting remainders, wood 
chips, etc. from the sawing area while the 
machine is running. 

Always guide the tool 

arm back to the neutral position first and 
then switch the machine off.

f

Guide the saw blade against the workpiece 
only when the machine is switched on. 

Oth-

erwise there is damage of kickback, when 
the saw blade becomes wedged in the work-
piece.

f

Keep handles dry, clean, and free from oil 
and grease. 

Greasy, oily handles are slippery 

causing loss of control.

OBJ_BUCH-1270-001.book  Page 27  Thursday, July 22, 2010  12:44 PM