VITEK VT-1677 W - Инструкция по эксплуатации - Страница 7

control with “0” and slightly pressing, turn it 
anticlockwise.
Put the attachment body (24) into the body 

• 

jack (5), turn it anti clockwise until complete 
locking (see the picture of the mincer ap-
pearance).
Put the food tray (2).

• 

Insert the plug into the socket.

• 

Switch on the unit by pressing the (8) button.

• 

Switch on the low speed operation button (6), 

• 

the buttons lighting will change from the blue 
one to the red one, indicating that the low 
speed operation mode is on.
Use only the pusher (1), supplied with the 

• 

unit. Do not use foreign objects to push to-
matoes and berries. Never use your fingers 
to push them.
Extraction control (28) has 3 operating posi-

• 

tions. There are the corresponding symbols 
on the lid (27).  To adjust extraction degree, 
depending on type of vegetables and fruit, 
the control changes the position of the cone 
attachment in accordance with the symbols 
“1” “2” “3”, pressing it to the feeder screw. 

 CARE

After use, switch off the mincer by pressing 

• 

the (8) button and disconnect the cord from 
the power supply.
Press the clamp (4), rotate the mincer head 

• 

clockwise and remove it (see the picture of 
the mincer appearance).
Unscrew the nut (14), remove the accesso-

• 

ries (15, 16 or 17, 18), the grates (10 or 13) or 
the blade (12) from the feeder screw (11). 
Take the feeder screw (11) out of the head 

• 

(3). 
Remove remains of the products from the 

• 

feeder screw.
The accessories (1, 2, 15, 16, 17, 18, 19, 25, 

• 

26, 27, 28) can be washed in a dish wash ma-
chine (pic. A).
For convenient and compact storage the at-

• 

tachments (15,16, 17, 18) can be stored in-
side the pusher (1).
W ipe the mincer body (5) with a damp cloth.

• 

To wash the extraction attachment press 

• 

the clamp button (4), on the body (5), turn it 
clockwise (see the picture of the mincer ap-
pearance) and remove it.
Turn the lid (27) clockwise and set it to the 

• 

“OPEN” position, remove the cone filter at-
tachment (26) and the plastic feeder screw 
(25).
Turn the extraction control (28) clockwise, 

• 

setting it to the “0”position and remove it.
Remove remains of the products from the 

• 

feeder screw.
Wash all removable parts in warm sudsy wa-

• 

ter with a neutral detergent, rinse and dry 
thoroughly.
Do not use solvents and abrasives to clean 

• 

the body (5).
Provide the liquid does not get into the body.

• 

Before you take the accessories away for 

• 

keeping, oil the attachments (10, 13) and the 
blade (12) with plant oil. This way they will be 
protected from oxidation.

SPECIFICATIONS

Power supply: 220-240 V ~50/60 Hz
Maximal power: 1500 W

The manufacturer preserves the right to change 
the design and the specifications of the unit 
without a preliminary notification. 

Life time of the unit is - 5  years

GUARANTEE

Details regarding guarantee conditions can be 
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt 
must be produced when making any claim under 
the terms of this guarantee.

This product conforms to the EMC-
Requirements as laid down by the 
Council Directive 89/336/EEC and to the 
Law Voltage Regulation (73/23 EEC)

7

              ENGLISH         

1677 Instrukz.indd   7

1677 Instrukz.indd   7

01.08.2011   18:26:28

01.08.2011   18:26:28