Маршрутизаторы Cisco RV340 Dual WAN Gigabit - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
To register and manage your new Cisco product click
Smart Licensing Manager
and register for a Cisco
Smart account if you don't have one.
To access the License page, select
Administration > License
.
A pop-up will appear stating if you are in Evaluation Mode. You must register your Cisco Product with the
Cisco Smart Software Licensing. To register your product, follow these steps:
•
Ensure that the product has access to the internet. This might require to edit the Transport Settings. To
edit the Transport Settings, click
Transport
and enter the Contact Email and Proxy. Next, click
Apply
.
•
Log in to your Smart Account in Smart Licensing Manager.
•
Navigate to the Virtual Account containing the licenses to be used in this product instance.
•
Generate a Product Instance Registration Token (this identifies your Smart Account) and copy or save
it,
•
Click
Register
and paste the Token into the window that appears.
In the License section, you can configure the licenses or register the router. It simplifies the Cisco software
experience and helps you understand how the Cisco software is used.
Request a Smart Account
A Smart Account provides a repository for Smart enabled Cisco devices and enables Users to manage their
Cisco licenses. Users can activate and monitor their license usage as well as track any future Cisco purchases.
You will need to create a Customer Smart Account to fully utilize the license management features of the
device.
To request a Customer Smart Account, log into
(CSC). If you do not have a CCO ID,
go to
and click
Register
now.
Step 1
Access
Step 2
Go to Administration and then click on
Request Smart Account
.
Step 3
Select "
Yes, I have the authority to represent my company
" and you will authorize the Smart Account activation.
Select "
No, the person specified below should be notified to authorize activation
" if you do not have the authority
or prefer not to authorize the Smart Account.
Step 4
Next, enter the account name and click
Continue
.
Optional
—
Edit the account domain identifier if needed by following these steps:
Step 5
In the Edit Account Identifier, change the Domain Identifier by editing the domain or adding a prefix.
Step 6
Click OK to confirm the new domain ID.
Step 7
Verify the account name and edit if required.
Step 8
Click
Continue
to proceed with the Smart Account request.
If you edit the Account Domain Identifier at the time of the Smart Account request, Cisco will contact you to
complete the approval process.
Note
RV340 Administration Guide
21
Administration
Request a Smart Account
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
