Stanley D 211/8/24 100546056 - Инструкция по эксплуатации - Страница 21

21

G

B

1. PRECAUTIONS

An ACOUSTIC PRESSURE value of 4 m. 

corresponds to the ACOUSTIC POWER value 

stated on the label located on the compressor, 

minus 20 dB.

THINGS TO DO

●

The compressor must be used in a suitable 

environment (well ventilated with an ambient 

temperature of between +5°C and +40°C) and 

never in places affected by dust, acids, vapors, 

explosive or flammable gases

.

●

  Always maintain a safety distance of at least 4 

meters between the compressor and the work area.

●

  Any coloring of the belt guards of the compressor 

during painting operations indicates that the distance 

is too short.

●

  Insert the plug of the electric cable in a socket of 

suitable  shape,  voltage  and  frequency  complying 

with current regulations.

●

For  three-phase  versions  have  the  plug  fitted  by  a 

qualified  electrician  according  to  local  regulations. 

The  first  time  you  start  the  compressor,  check  that 

the direction of rotation is correct and matches that 

indicated  by  the  arrow  on  the  conveyor  (

Fig. 10

, 

the air must be conveyed towards the head of the 

compressor).

●

  Use extension cables with a maximum length of 5 

meters and of suitable cross-section.

●

  The use of extension cables of different length and 

also of adapters and multiple sockets should be 

avoided.

●

  Always use the switch of the pressure switch to 

switch off the compressor.

●

  Always use the handle to move the compressor.

●

When  operating,  the  compressor  must  be  placed 

on a stable, horizontal surface to guarantee correct 

lubrication.

THINGS 

NOT

 TO DO

●

Never direct the jet of air towards persons, animals 

or your body. (Always wear safety goggles to protect 

your eyes against flying objects that may be lifted by 

the jet of air).

●

Never  direct  the  jet  of  liquids  sprayed  by  tools 

connected to the compressor towards the 

compressor.

●

  Never use the appliance with bare feet or wet hands 

or feet.

●

  Never pull the power cable to disconnect the plug 

from the socket or to move the compressor.

●

  Never leave the appliance exposed to adverse 

weather conditions.

●

  Never transport the compressor with the receiver 

under pressure.

●

  Do not weld or machine the receiver. In the case of 

faults or rusting, replace the entire receiver.

●

  Never allow inexpert persons to use the compressor. 

Keep children and animals at a distance from the 

work area.

●

  This appliance is not intended for use by persons 

(including  children)  with  reduced  physical,  sensory 

or  mental  capabilities,  or  lack  of  experience  and 

knowledge, unless they have been given supervision 

or instruction concerning the use of the appliance by 

a person responsible for their safety. 

●

  Children should be supervised to ensure that they do 

not play with the appliance.

●

Do  not  position  flammable  or  nylon/fabric  objects 

closed to and/or on the compressor.

●

Never clean the compressor with flammable liquids 

or solvents. Check that you have unplugged the 

compressor and clean with a damp cloth only.

●

  The compressor must be used only for air compression. 

Do not use the compressor for any other type of gas.

●

  The compressed air produced by the compressor 

cannot  not  be  used  for  pharmaceutical,  food  or 

medical purposes except after particular treatments 

and cannot be used to fill the air bottles of scuba 

divers.

THINGS YOU SHOULD KNOW

●

To avoid overheating of the electric motor, 

this compressor is designed for intermittent 

operation as indicated on the technical dataplate 

(for  example,  S3-25  means  2.5  minutes  ON,  7.5 

minutes  OFF).  In  the  case  of  overheating,  the 

thermal  cutout  of  the  motor  trips,  automatically 

cutting off the power when the temperature is too 

high. The motor restarts automatically when normal 

temperature conditions are restored.

●

To facilitate restart of the compressor, in addition 

to the operations indicated, it is important to 

return the button of the pressure switch to the 

OFF position and then to ON again

 (

fig. 11-12

).

●

On certain «V» type versions, the reset button on the 

terminal box of the motor must be pressed (

fig. 13

).

●

On three-phase versions, simply return the button of 

the  pressure switch to the ON position. (

fig. 12

).

Preserve this handbook for future reference