Fulgor Milano FVSD 150 TC - Инструкция по эксплуатации - Страница 49

EN

17

9 - After use

10 - Cleaning and maintenance

• Switch off the machine by pressing 

 for 2”.

• Clean and dry the packaging machine and the accessories 

used.

• When the tray is completely dry, close the lid.
• Close the drawer.

• For cleaning, do not use stainless steel sponges, scrapers, 

abrasive, acid or aggressive materials which could 

irreversibly damage the surfaces.

• Use a soft cloth and a mild detergent.
• Switch off the machine by pressing 

 for 2”.

External cleaning

• For steel parts it is advisable to clean by following the 

direction of the satin finish.

• For the lid and the controls front, use a soft, clean and 

damp cloth.

Cleaning the tray

1)  Wait until the sealing bar has cooled down
2)  Remove the sealing bar by pulling it upwards
3)  Avoid cleaning the intake opening with water. The water 

if aspirated could result in damage to the packaging 

machine.

4)  Remove any dirt with a soft cloth moistened with warm 

water. If required, use a neutral disinfectant.

5)  Dry with a soft cloth.

Cleaning the sealing bar

1)  Wait until the sealing bar has cooled down.
2)  Remove the sealing bar by pulling it upwards.
3)  Clean with a soft cloth moistened with warm water.
4)  Dry thoroughly before using the packaging machine.

External vacuum adapter cleaning

1)  Use hot water and detergent for dishes.
2)  Rinse thoroughly.
3)  Dry with a clean cloth.
4)  Reuse the adapter when it is completely dry.