Bosch GWS 24-300 J - Инструкция по эксплуатации - Страница 15

 English | 

15

Bosch Power Tools

1 609 92A 0J8 | (4.7.14)



Do not restart the cutting operation in the workpiece. 
Let the wheel reach full speed and carefully re-enter 
the cut. 

The wheel may bind, walk up or kickback if the 

power tool is restarted in the workpiece.



Support panels or any oversized workpiece to minimize 
the risk of wheel pinching and kickback. 

Large work-

pieces tend to sag under their own weight. Supports must 
be placed under the workpiece near the line of cut and near 
the edge of the workpiece on both sides of the wheel.



Use extra caution when making a “pocket cut” into ex-
isting walls or other blind areas. 

The protruding wheel 

may cut gas or water pipes, electrical wiring or objects that 
can cause kickback.

Additional safety warnings

Wear safety goggles.



Use clamps or another practical way to secure and sup-
port the workpiece to a stable platform. 

Holding the 

work by your hand or against the body leaves it unstable 
and may lead to loss of control.



Wear hearing protection, safety goggles, dust mask 
and gloves. As dust mask, use at least a particle filter-
ing half mask of filter class FFP 2.



Use suitable detectors to determine if utility lines are 
hidden in the work area or call the local utility company 
for assistance. 

Contact with electric lines can lead to fire 

and electric shock. Damaging a gas line can lead to explo-
sion. Penetrating a water line causes property damage or 
may cause an electric shock.



When working stone, use dust extraction. The vacuum 
cleaner must be approved for the extraction of stone 
dust. 

Using this equipment reduces dust-related hazards.



Use a cutting guide when cutting stone. 

Without sideward 

guidance, the cutting disc can jam and cause kickback.



When working with the machine, always hold it firmly 
with both hands and provide for a secure stance. 

The 

power tool is guided more secure with both hands.



Never use the machine with a damaged cable. Do not 
touch the damaged cable and pull the mains plug when 
the cable is damaged while working. 

Damaged cables in-

crease the risk of an electric shock.

Products sold in GB only

: Your product is fitted with a 

BS 1363/A approved electric plug with internal fuse (ASTA 
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be 
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should 
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible 
shock hazard and should never be inserted into a mains sock-
et elsewhere.

Products sold in AUS and NZ only

: Use a residual current de-

vice (RCD) with a rated residual current of 30 mA or less.

Product Description and Specifica-
tions

Read all safety warnings and all instruc-
tions. 

Failure to follow the warnings and in-

structions may result in electric shock, fire 
and/or serious injury.

While reading the operating instructions, unfold the graphics 
page for the machine and leave it open.

Intended Use

The machine is intended for cutting metal and stone materials 
without using water while resting firmly with the cutting guide 
on the workpiece.
For cutting stone, a special cutting guide with dust extraction 
protection guard (accessory) must be used.

Product Features

The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.

1

Bow handle

2

Thread for bow handle

3

Spindle lock button

4

Direction-of-rotation arrow for grinding spindle

5

Grinder spindle

6

Protection guard for cutting

7

Screw for adjustment of protection guard

8

Clamping lever for protection guard

9

Mounting flange

10

Grinding/cutting disc *

11

Face plate

12

Quick-clamping nut 

*

13

Clamping nut

14

Hex Key **

15

Cutting guide

16

On/Off switch

17

Encoding key

18

Cutting guide with dust extraction protection guard *

19

Elbow  *

20

Handle (insulated gripping surface)

* Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories 
can be found in our accessories program.

** Commercially available (not included in the delivery scope)

OBJ_BUCH-280-005.book  Page 15  Friday, July 4, 2014  10:30 AM