Плита La Cornue CornuFe 110 F1 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
INSTALLATION
Check the appliance is electrically safe and gas sound when you have finished.
29
11. Gas connection
16 ¾” (425mm)
5”
(127mm)
5”
(127mm)
8 7⁄8” (225mm)
Gas inlet
Area accessible through drawer
Side of range
Gas shut off valve
3 9⁄16”
(90mm)
Fig. 11.1
Fig. 11.2
Installation of this range must conform with local codes or, in
the absence of local codes, with the National Fuel Gas Code,
ANSI Z223.1-latest edition.
In Canada
The range must be installed in accordance with the current
CGA Standard CAN/CGA-B149 – Installation Codes for Gas
Burning Appliances and Equipment and/or local codes.
In the Commonwealth of Massachusetts
This product must be installed by a licensed plumber or
gas fitter when installed within the Commonwealth of
Massachusetts.
A “T” handle type manual gas valve must be installed in the
gas supply line to this appliance.
Gas supply requirements
Recommended gas pipe outlet locations are shown in
Provide adequate gas supply
Prior to installation, make sure that the local distribution
conditions (nature of the gas and gas pressure) and the
adjustment of the appliance are compatible.
A conversion kit for LP gas (Propane) is supplied with the
range. When converted to LP gas, a pressure of 10’’ of the
water column (2.49 kPa) is required.
Make sure you are supplying your range with the correct type
of gas.
We recommend that the range be converted before
installation. This must be done before the range can be used
on LP gas.
For proper operation, the pressure of natural gas supplied to
the regulator must be between 4½’’ and 13’’ of water column
(1.12–3.24 kPa).
For LP gas, the pressure supplied must be between 10’’ and
13’’ of water column (2.49–3.24 kPa).
When checking for proper operation of the regulator,
the inlet pressure must be at least 1’’ (0.25 kPa) above the
manufacturer’s specified manifold pressure.
The pressure regulator located at the inlet of the range
manifold must remain in the supply line, regardless of
whether natural or LP gas is being used.
A flexible metal appliance connector used to connect the
range to the gas supply line should have an I.D. of ½’’ and be
5 feet in length for ease of installation.
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
