La Cornue CornuFe 110 F1 - Инструкция по эксплуатации - Страница 19

15



Never use caustic or abrasive cleaners as these will 

damage the surface. 

Griddle 

(Optional extra)

Always clean the griddle after use. Allow to cool completely 

before removing. Immerse the griddle plate in hot soapy 

water. Use a soft cloth or, for stubborn stains, a nylon washing 

up brush. 

Control panel and oven doors

Avoid using any abrasive cleaners including cream cleaners, 

on brushed stainless steel surfaces. For best results use liquid 

detergents. 
The control panel and control knobs should only be cleaned 

with a soft cloth wrung out in clean hot soapy water – but 

take care that no surplus water seeps into the appliance. Wipe 

with a clean dampened cloth then polish with a dry cloth. The 

oven doors should only be cleaned with a soft cloth wrung 

out in clean, hot, soapy water. 

Cleaning brass parts 

(Some models only)

Uncoated natural brass is used as part of the authentic finish 

on some models and this may tarnish with age. To regain a 

polished finish, these areas should be cleaned using a gentle 

brass cleaner. Take care to ensure the cleaner does not affect 

surrounding areas. 

Ovens

The side panels can be removed for cleaning and for cleaning 

behind them. 

Removing the panels to clean the enamel interior

Some of the lining panels can be removed for cleaning. 
If you wish to clean the enamel interior of the oven, you 

will need to remove the shelves before removing the ‘Cook 

& Clean’ panels.  You do not have to remove the support 

brackets to remove the panels. Lift each panel upward and 

slide forward off the support brackets (

Fig. 5.4

). 

Once the panels have been removed, the oven enamel 

interior can be cleaned. 
Refit in the reverse order. 

ArtNo.311-0028 - Burner head off

A

C

B

D

ArtNo.311-0029 - Burner base & head alignment

ArtNo.311-0030 - Burner head fitting

A - Burner head,  B - Burner ring,  C - Base

Fig. 5.1

Fig. 5.2

Fig. 5.3 

Fig. 5.4