La Cornue CornuFe 110 F1 - Инструкция по эксплуатации - Страница 31

INSTALLATION

Check the appliance is electrically safe and gas sound when you have finished.

27

Leveling

It is recommended that you use a spirit level on a shelf in one 

of the ovens to check the level. 
Place the range in its intended position, taking care not to 

twist it within the gap between the kitchen units as damage 

may occur to the range or the units. 
The front feet and rear rollers can be adjusted to level the 

range. To adjust the height of the rear of the range turn the 

adjusting nuts at the front bottom corners of the range. 

Anti-tip device

NOTE:

 The range must be set to the correct height and 

leveled before the anti-tip bracket is installed. 

Fitting the anti-tip device

1. 

A range using a flexible gas connector must be secured 

with a suitable anti-tip device. 

2. 

A suitable anti-tip device is supplied and shown in  

Fig. 10.10

. 

3. 

First attach the bracket location device to the rear of the 

cooker (

Fig. 10.10

). Then adjust the bracket to engage 

through the slot of the device (

Fig. 10.11

 and 

Fig. 10.12

).



DO NOT operate the range before the appliance is 

in its installed position and the anti-tip devices are 

engaged. 



If the appliance is moved, ensure that the anti-tip 

devices are re-engaged and the range has been 

returned to its original installed position. 



DO NOT step, lean or swing on the range doors 

or drawer as this could tip the range and result in 

serious injury or death. 

Wall fixing

Where floor fixing is impractical and provided that the outer 

anti-tip bracket can be attached to a solid wall, the anti-tip 

device may be attached to a wall (

Fig. 10.12

). Make sure to 

use suitable screws and fixings. 

Fig. 10.10

ArtNo.070-0014 - Stability bracket - Wall fitting

Cooker

Stability 

bracket

Floor

Stability

location 

bracket

Wall

Typical wall mounting

ArtNo.070-0014 - Stability bracket - Wall fitting

Cooker

Stability bracket

Floor

Stability 

location 

bracket

Typical floor mounting

Alternative positions

for stability location 

bracket

Fig. 10.11

Fig. 10.12

Alternative positions 

for anti-tip device

Anti-tip bracket

Anti-tip 

bracket

Anti-tip  

location
bracket

Range

Range