Profi Cook PC-SV 1126 - Инструкция по эксплуатации - Страница 46

46

PC-SV1126_IM 

19.09.16

Cleaning

  WARNING: 

•  Always turn the device off before cleaning it and remove the 

mains plug. Wait until the device has cooled down.

•  Do not immerse the motor housing in water for cleaning in any 

case. Doing so may result in an electric shock or fire.

  CAUTION:

•  Do not use any wire brush or other abrasive objects.

•  Do not use any acidic or abrasive detergents.

Motor Housing

Clean the housing only with a damp cloth and a squirt of 

washing-up liquid. Dry with a cloth.

Heater Box and Cover

For thorough cleaning, please remove the heater box.
1.  Turn the heater box towards “   “ and remove from the 

motor housing. (See page 4, Fig. B)

2.  Remove the cover from the heater box. (See page 4, 

Fig. C)

3.  Clean these parts in a bowl of hot water. Then dry 

everything before assembling the parts again.

  NOTE:

During assembly, make sure that the marking   on the 

heater box and the symbol   on the motor housing are 

aligned on top of each other.

Decalcification

•  Descale the appliance at regular intervals.

•  The frequency of the decalcifying operation depends on 

the hardness of the water and on how often the appliance 

is used.

•  Please do not use vinegar but a commercially available 

decalcification agent on the basis of citric acid. Only use 

the quantities stated in the instructions.

1.  Attach the appliance onto a suitable pan.

2.  Fill up the pot with hot water and add a descaling agent.

3.  Set the temperature and the timer as described in the 

“Use“ section.

 - Set the maximum temperature.

 - Set the timer to a couple of minutes.

4.  Repeat the process, as necessary, until the limescale has 

completely dissolved.

Storage

•  Clean the device as described.

•  We recommend that you store the device in its original 

packaging when it is not to be used for a longer period.

•  Always store the device at a well ventilated and dry place 

outside the reach of children.

Troubleshooting

Problem

Possible Cause Remedy

The device is not 

working.

The device has 

no power supply.

Check the socket 

with another 

appliance.
Plug in the mains 

plug correctly.
Check the main 

circuit breaker.

The appliance 

switches off 

prematurely or 

the temperature 

protection unit 

starts up (   ).

The device is 

calcified.

Descale the 

appliance as 

described.

The water level 

has dropped 

below the MIN 

level mark.

Fill up with water 

and restart the 

process.

Technical Data

Model:.................................................................... PC-SV 1126

Power supply:....................................... 220 - 240 V~, 50 / 60 Hz

Power rating: ................................................................... 800 W

Protection class: .......................................................................

Circulation pump: ...................... 8 liters per minute at the most

Temperature: .................................................... 0 to 90 °C max.

Temperature stability: ...................................................

±

 0,1 °C

Suitable pan height: ......................................... 15 cm or higher

Net weight: ....................................................... approx. 1.18 kg
The right to make technical and design modifications in the 

course of continuous product development remains reserved.
This device has been tested according to all relevant current 

CE guidelines, such as electromagnetic compatibility and low