Bosch MUM 58C10 - Инструкция по эксплуатации - Страница 24

24 

en

Cleaning and servicing 

Note:

 If the food to be processed sticks in 

the continuous­feed shredder, switch food 

processor off, pull out mains plug, wait until 

the drive comes to a standstill, remove 

cover from the continuous­feed shredder 

and empty feed tube.

After using the appliance

■

Switch off the appliance with the rotary 

switch.

■

Rotate the continuous­feed shredder in 

an anti­clockwise direction and remove.

■

Rotate the lid in an anti­clockwise direc­

tion and remove.

■

Remove disc holder with disc. To do this, 

press finger from below against the drive 

shaft 

(Fig. 

J

)

.

■

Clean parts.

Blender

W

Risk of injury from sharp blades / 

rotating drive!

Never place fingers in the attached blender! 

Do not remove / attach the blender until the 

drive is at a standstill! Operate the assem­

bled blender only and with the lid attached.

W

Risk of scalding!

If processing hot liquids, steam escapes 

through the funnel in the lid. Add a 

max. 0,5 litres of hot or frothing liquid.

Warning!

Blender may be damaged. Do not process 

deep­frozen ingredients (except ice cubes). 

Do not operate blender when empty.

Working with the blender

Fig. 

K

:

■

Press the release button and 

move the swivel arm to 

position 

4

.

■

Remove the blender drive cover.

■

Attach blender jug (mark on the handle 

on mark on the base unit) and turn all the 

way in an anti­clockwise direction.

■

Add ingredients. 

Maximum amount of liquid = 1.25 litres; 

maximum amount of frothing or hot 

liquids = 0.5 litres; 

Optimal processing capacity –  

solids = 50­100 g;

■

Attach the cover and turn anti­clockwise 

all the way into the blender handle. The 

cover must be locked in position.

■

Set the rotary switch to the desired 

setting.

Adding more ingredients
Fig. 

K

-8:

■

Switch off the appliance with the rotary 

switch.

■

Remove the lid and add ingredients

or

■

remove the funnel and gradually add solid 

ingredients through the refill opening

or

■

pour liquid ingredients through the funnel.

After using the appliance

■

Switch off the appliance with the rotary 

switch.

■

Rotate the blender in a clockwise direc­

tion and remove.

Tip:

 It is recommended to clean the blender 

immediately after use.

Cleaning and servicing

The attachments and accessories used 

must be thoroughly cleaned after each use.

Attention!

Do not use abrasive cleaning agents. 

Surfaces may be damaged.

Cleaning the base unit

W

Danger of electric shock!

Never immerse the base unit in water or 

place under running water. Do not use a 

steam cleaner.

■

Remove mains plug.

■

Wipe the base unit and drive cover with 

a damp cloth. If required, use a little 

detergent.

■

Then dry the base unit.