Bosch MUM 58C10 - Инструкция по эксплуатации - Страница 25

 25

en

 Storage

Cleaning the bowl and tools

The bowl and tools are dishwasher­proof. 

Do not wedge plastic parts in the dish­

washer, as they could be permanently 

deformed during the washing process!

Cleaning the continuous-feed 

shredder

W

Risk of injury from sharp blades!

Do not grip the sharp blades or edges of the 

cutting discs. Clean them with a brush.
All parts of the continuous­feed shredder 

are dishwasher­proof.

Tip:

 To remove the red film after processing 

e.g. carrots, pour a little cooking oil on 

a cloth and rub the film off the continu­

ous­feed shredder (not the cutting discs). 

Then rinse the continuous­feed shredder.

Cleaning the blender

W

Risk of injury from sharp blades!

Do not touch blender blades with bare hands.

The blender jug, lid and funnel are 

dishwasher­proof.

Tip: 

After processing liquids, it is often suffi­

cient to clean the blender without removing 

it from the appliance. Pour a little water and 

washing­up liquid into the attached blender. 

Switch on the blender for several seconds 

(setting 

M

). Pour out the water and rinse out 

the blender with clear water.

Important information

If required, clean accessories bag. Follow 

care instructions in the bag.

Storage

W

Risk of injury!

When the appliance is not in use, pull out 

the mains plug.

Fig. 

L

:

■

Store tools and cutting discs in the 

accessories bag.

■

Keep accessories bag in the bowl.

Troubleshooting

W

Risk of injury!

Before eliminating a fault, pull out the 

mains plug.

Important information 

The Operating indicator flashes if the appli­

ance has been operated incorrectly or the 

electronic fuse has tripped or the appliance 

is defective.

The swivel arm must be engaged in 

every operating position.

Initially try to eliminate the problem which 

has occurred with the help of the following 

information.

Fault

Appliance does not start.

Remedial action

■

Check the power supply.

■

Check the mains plug.

■

Check swivel arm. Correct position? 

Engaged?

■

Screw on blender or bowl as far as 

possible.

■

Attach the blender cover and screw on as 

far as possible.

■

Attach drive cover to unused drives.

■

The safety lock is active. Switch 

appliance to 

P

 and then back to the 

required setting.

Fault

Appliance switches off during use. The 

overload protection feature has been 

activated. Too much food was processed at 

one time.

Remedial action

■

Switch off the appliance.

■

Reduce processing quantity. 

■

Do not exceed permitted maximum 

quantities (see “Application examples”).

Fault

While the drive was running, the release 

button was inadvertently pressed. The 

swivel arm moves up. The drive switches 

off, but does not stop in the tool change 

position.